earticle

COMBUSTION AND EMISSION CHARACTERISTICS OF A TURBOCHARGED DIESEL ENGINE FUELLED WITH DIMETHYL ETHER

Wu, J., Huang, Z., Qiao, X., Lu, J., Zhang, L., Zhang, J.

[Kisti 연계] 한국자동차공학회 International journal of automotive technology Vol.7 No.6 2006 pp.645-652

COMBINED EFFECTS OF BD20, LOW SULFUR DIESEL FUEL AND DIESEL OXIDATION CATALYST IN A HD DIESEL ENGINE

Baik, D.S.

[Kisti 연계] 한국자동차공학회 International journal of automotive technology Vol.7 No.6 2006 pp.653-658

LOW PRESSURE LOOP EGR SYSTEM ANALYSIS USING SIMULATION AND EXPERIMENTAL INVESTIGATION IN HEAVY-DUTY DIESEL ENGINE

Lee, S.J., Lee, K.S., Song, S.H., Chun, K.M.

[Kisti 연계] 한국자동차공학회 International journal of automotive technology Vol.7 No.6 2006 pp.659-666

EFFECTS OF TRACE METALS ON PARTICULATE MATTER FORMATION IN A DIESEL ENGINE: METAL CONTENTS FROM FERROCENE AND LUBE OIL

Lee, D.G., Miller, A., Park, K.H., Zachariah, M.R.

[Kisti 연계] 한국자동차공학회 International journal of automotive technology Vol.7 No.6 2006 pp.667-673

EXPERIMENTAL STUDY ON THE STRATIFIED COMBUSTION CHARACTERISTICS ACCORDING TO COMPRESSION RATIO AND INTAKE TEMPERATURE IN A DIG ENGINE

Lee, C.H., Lee, K.H.

[Kisti 연계] 한국자동차공학회 International journal of automotive technology Vol.7 No.6 2006 pp.675-680

TECHNIQUE OF SEPARATE MEASURING SIDE SLIP FOR TOE ANGLE AND CAMBER ANGLE

Nozaki, H.

[Kisti 연계] 한국자동차공학회 International journal of automotive technology Vol.7 No.6 2006 pp.681-686

DEVELOPMENT OF A NETWORK-BASED TRACTION CONTROL SYSTEM, VALIDATION OF ITS TRACTION CONTROL ALGORITHM AND EVALUATION OF ITS PERFORMANCE USING NET-HILS

Ryu, J., Yoon, M., SunWoo, M.

[Kisti 연계] 한국자동차공학회 International journal of automotive technology Vol.7 No.6 2006 pp.687-695

CRITICAL SPEED ANALYSIS OF JUDDERING DUE TO CHANGE IN SURFACE TEMPERATURE OF DISK BRAKE

Kim, M.G., Cho, C.

[Kisti 연계] 한국자동차공학회 International journal of automotive technology Vol.7 No.6 2006 pp.697-702

SENSITIVITY ANALYSIS OF SUV PARAMETERS ON ROLLOVER PROPENSITY

Jang, B.C., Marimuthu, R.P.

[Kisti 연계] 한국자동차공학회 International journal of automotive technology Vol.7 No.6 2006 pp.703-714

EXPERIMENTAL EVALUATION OF USED CARS FOR FRONTAL COLLISION COMPATIBILITY

Lim, J.H., Park, I.S., Heo, S.J.

[Kisti 연계] 한국자동차공학회 International journal of automotive technology Vol.7 No.6 2006 pp.715-720

DEVELOPMENT OF DIGITAL ASSEMBLY CELL FOR LASER WELDING OF SIDE PANELS

Park, H.S., Lee, H.B.

[Kisti 연계] 한국자동차공학회 International journal of automotive technology Vol.7 No.6 2006 pp.721-728

ACTIVE FAULT-TOLERANT CONTROL OF INDUCTION MOTOR DRIVES IN EV AND HEV AGAINST SENSOR FAILURES USING A FUZZY DECISION SYSTEM

Benbouzid, M.E.H., Diallo, D., Zeraoulia, M., Zidani, F.

[Kisti 연계] 한국자동차공학회 International journal of automotive technology Vol.7 No.6 2006 pp.729-739

FATIGUE LIFE PREDICTION OF RUBBER MATERIALS USING TEARING ENERGY

Kim, H., Kim, H.Y.

[Kisti 연계] 한국자동차공학회 International journal of automotive technology Vol.7 No.6 2006 pp.741-747

COMPLEX STOCHASTIC WHEELBASE PREVIEW CONTROL AND SIMULATION OF A SEMI-ACTIVE MOTORCYCLE SUSPENSION BASED ON HIERARCHICAL MODELING METHOD

Wu, L., Chen, H.L.

[Kisti 연계] 한국자동차공학회 International journal of automotive technology Vol.7 No.6 2006 pp.749-756

DEVELOPMENT OF AN ACCELERATED LIFE TEST PROCEDURE FOR COOLING FAN MOTORS

Shin, W.G., Lee, S.H., Song, Y.S.

[Kisti 연계] 한국자동차공학회 International journal of automotive technology Vol.7 No.6 2006 pp.757-762