earticle

Laser treatment of HVOF coating: model study and characterization

Taha-al, Z.Y., Hashmi, M.S., Yilbas, B.S.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1439-1444

Microstructure analysis of aluminum extrusion: grain size distribution in AA6060, AA6082 and AA 7075 alloys

Schikorra, M., Donati, L., Tomesani, L., Tekkaya, A.E.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1445-1451

Micro press forming and assembling of micro parts in a progressive die

Yang, Ming, Manabe, Ken-ichi, Ito, Kuniyoshi

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1452-1455

Finite element simulation of deformation processes of micro-components

Gao, W.M., Kong, L.X., Hodgson, P.D.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1456-1463

Numerical and experimental approach on energy dissipation in nano colloidal damper

Ku, T.W., Jeon, S.B., Bui, V.H., Song, W.J., Park, M.S., Kang, B.S.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1464-1470

Study of the effect of imperfect tips on nanoindentation by FEM

Chen, Feng-Yuan, Chang, Rwei-Ching

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1471-1476

Parametric study of injection molding and hot embossing in polymer microfabrication

Wu, Cheng-Hsien, Kuo, Hsien-Chang

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1477-1482

A CFD-aided experimental study on bending of micro glass pipettes

Xia, W., Hsu, H.Y., Kong, L.X.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1483-1490

A novel stylus profiler without nonlinearity and parasitic motion for FPD inspection system

Jung, Hyun-Soo, Hong, Min-Sung, Lee, Soo-Hun, Park, June-Ho, Kang, Dong-Woo, Lee, Moon-G.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1491-1497

Fabrication of a metal mold with microstructures using a novel passive-alignment recombining technique

Wu, Chih-Wei, Tsai, Jin-Rong, Tsai, Hung-Yin, Hsiao, Chun-Ching

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1498-1504

Viscous pressure bulging of aluminium alloy sheet at warm temperatures

Liu, Jianguang, Peng, Qiucai, Liu, Yan, Wang, Zhongjin

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1505-1511

Prediction of failure in tube hydroforming process using a damage model

Majzoobi, G.H., Saniee, F.Freshteh, Shirazi, A.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1512-1517

Incremental forming of Mg alloy sheet at elevated temperatures

Kim, S.W., Lee, Y.S., Kang, S.H., Lee, J.H.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1518-1522

Development of automotive engine cradle by hydroforming process

Kim, K.J., Kim, J.S., Choi, B.I., Kim, K.H., Choi, H.H., Kim, C.W., Kang, K.W., Song, J.H., Sung, C.W.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1523-1527

Measurement of the forward slip in cold strip rolling using a high speed digital camera

Lu, C., Tieu, A.K.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1528-1533

Instability map based on specific plastic work criterion for hot deformation

Lee, H.W., Kwon, H.C., Awais, M., Im, Y.T.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1534-1540

Research on interactive influences of parameters on T-shaped cold ring rolling by 3d-FE numerical simulation

Li, Lanyun, Yang, He, Guo, Lianggang, Sun, Zhichao

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1541-1547

A new extrusion method joining tube and sheet with holed rib

Moroi, Tstomu, Kuboki, Takashi, Murata, Makoto

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1548-1552

The effect of selected parameters on temperature distribution in axisymmetric extrusion process

Ajiboye, J.S., Adeyemi, M.B.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1553-1559

Artificial neural network modeling of phase volume fraction of Ti alloy under isothermal and non-isothermal hot forging conditions

Kim, J.H., Reddy, N.S., Yeom, J.T., Lee, C.S., Park, N.K.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1560-1565

The prediction of maximum forging load and effective stress for different material of bevel gear forging

Yang, T.S., Hwang, N.C., Chang, S.Y.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1566-1572

Die design in the complex shape drawing of cross roller guide to improve the dimensional accuracy

Lee, S.K., Lee, J.E., Kim, B.M., Kim, S.M.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1573-1579

Study of applying reverse engineering to turbine blade manufacture

She, Chen-Hua, Chang, Chun-Chi

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1580-1584

The design of blank's initial shape in the near net-shape deep drawing of square cup

Yang, T.S., Shyu, R.F.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1585-1592

Study of the rheological properties and the finishing behavior of abrasive gels in abrasive flow machining

Wang, A.C., Liu, C.H., Liang, K.Z., Pai, S.H.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1593-1598

A model to simulate surface roughness in the pad dressing process

Horng, T.L.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1599-1604

Investigation of internal ultrasonically assisted grinding of small holes: effect of ultrasonic vibration in truing and dressing of small CBN grinding wheel

Nomura, Mitsuyoshi, Wu, Yongbo, Kuriyagawa, Tsunemoto

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1605-1611

Development of automatic regrinding program for PC-based tool grinding machine

Wang, Y.C., Lee, B.Y., Lin, J.C., Jywe, W.Y., Shih, D.K.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1612-1616

Influence of current impulse on machining characteristics in EDM

Tsai, Y.Y., Lu, C.T.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1617-1621

Construction of a surface roughness prediction model for high speed machining

Lin, S.Y., Cheng, S.H., Chang, C.K.

[Kisti 연계] 대한기계학회 Journal of mechanical science and technology Vol.21 No.10 2007 pp.1622-1629