earticle

An Ultraprecise Machining System with a Hexapod Device to Measure Six-Degree-Of-Freedom Relative Motions Between The Tool And Workpiece

Oiwa, Takaaki

[Kisti 연계] 한국정밀공학회 International journal of precision engineering and manufacturing Vol.8 No.2 2007 pp.3-8

An Open-Loop Method for Point-to-Point Positioning of a Piezoelectric Actuator

Henmi, Nobuhiko, Tanaka, Michihiko

[Kisti 연계] 한국정밀공학회 International journal of precision engineering and manufacturing Vol.8 No.2 2007 pp.9-13

A Single Lens Micro-Angle Sensor

Saito, Yusuke, Gao, Wei, Kiyono, Satoshi

[Kisti 연계] 한국정밀공학회 International journal of precision engineering and manufacturing Vol.8 No.2 2007 pp.14-19

Design and Construction of a Surface Encoder with Dual Sine-Grids

Kimura, Akihide, Gao, Wei, Kiyono, Satoshi

[Kisti 연계] 한국정밀공학회 International journal of precision engineering and manufacturing Vol.8 No.2 2007 pp.20-25

Profile Measurements of Micro-aspheric Surfaces Using an Air-bearing Stylus with a Microprobe

Shibuya, Atsushi, Gao, Wei, Yoshikawa, Yasuo, Ju, Bing-Feng, Kiyono, Satoshi

[Kisti 연계] 한국정밀공학회 International journal of precision engineering and manufacturing Vol.8 No.2 2007 pp.26-31

A Dual-mode Pico-positioning System using Active Aerostatic Coupling

Mizumoto, Hiroshi, Yabuta, Yoshito, Arii, Shiro, Yabuya, Makoto, Tazoe, Yoichi

[Kisti 연계] 한국정밀공학회 International journal of precision engineering and manufacturing Vol.8 No.2 2007 pp.32-37

Ultrasonically Assisted Grinding for Mirror Surface Finishing of Dies with Electroplated Diamond Tools

Isobe, Hiromi, Hara, Keisuke, Kyusojin, Akira, Okada, Manabu, Yoshihara, Hideo

[Kisti 연계] 한국정밀공학회 International journal of precision engineering and manufacturing Vol.8 No.2 2007 pp.38-43

Non-contact Transportation of Flat Panel Substrate by Combined Ultrasonic Acoustic Viscous and Aerostatic Forces

Isobe, Hiromi, Fushimi, Masaaki, Ootsuka, Masami, Kyusojin, Akira

[Kisti 연계] 한국정밀공학회 International journal of precision engineering and manufacturing Vol.8 No.2 2007 pp.44-48

Nanometric Positioning Over a One-Millimeter Stroke Using a Flexure Guide and Electromagnetic Linear Motor

Fukada, Shigeo, Nishimura, Kentaro

[Kisti 연계] 한국정밀공학회 International journal of precision engineering and manufacturing Vol.8 No.2 2007 pp.49-53

An AFM-based Edge Profile Measuring Instrument for Diamond Cutting Tools

Asai, Takemi, Motoki, Takenori, Gao, Wei, Ju, Bing-Feng, Kiyono, Satoshi

[Kisti 연계] 한국정밀공학회 International journal of precision engineering and manufacturing Vol.8 No.2 2007 pp.54-58

An Integrated Approach to the Analysis and Design of a Three-Axis Cross-Coupling Control System

Jee, Sung-Chul, Lee, Hak-Chul

[Kisti 연계] 한국정밀공학회 International journal of precision engineering and manufacturing Vol.8 No.2 2007 pp.59-63

Estimation of 2D Position and Flatness Errors for a Planar XY Stage Based on Measured Guideway Profiles

Hwang, Joo-Ho, Park, Chun-Hong, Kim, Seung-Woo

[Kisti 연계] 한국정밀공학회 International journal of precision engineering and manufacturing Vol.8 No.2 2007 pp.64-69

Self Displacement Sensing (SDS) Nano Stage

Choi, Soo-Chang, Park, Jeong-Woo, Kim, Yong-Woo, Lee, Deug-Woo

[Kisti 연계] 한국정밀공학회 International journal of precision engineering and manufacturing Vol.8 No.2 2007 pp.70-74

Self-Alignment and Bonding of Microparts Using Adhesive Droplets

Sato, Kaiji, Lee, Keun-Uk, Nishimura, Masahiko, Okutsu, Kazutoshi

[Kisti 연계] 한국정밀공학회 International journal of precision engineering and manufacturing Vol.8 No.2 2007 pp.75-79

Phase Modulation Homodyne Interferometer with a 10-pm Resolution Using a Tunable Laser Diode

Ishige, Masashi, Matsuura, Fumio, Kawasugi, Masaaki, Aketagawa, Masato

[Kisti 연계] 한국정밀공학회 International journal of precision engineering and manufacturing Vol.8 No.2 2007 pp.80-84

Influence of Rolling Friction in Linear Ball Guideways on Positioning Accuracy

Tanaka, Toshiharu, Ikeda, Kyohei, Otsuka, Jiro, Masuda, Ikuro, Oiwa, Takaaki

[Kisti 연계] 한국정밀공학회 International journal of precision engineering and manufacturing Vol.8 No.2 2007 pp.85-89