earticle

논문검색

수처리용 Drywell 구조 및 모터 회전수 PID 제어 감속기의 개발

원문정보

Development of the Reducer with the Drywell Structure and the Motor RPM PID Control for a Water Treatment

오상엽

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

The agitator with a reducer are usually using on the process of a water treatment. However, working the reducer at the field, a lubricant oil can leak out. It causes an environment pollution and a water service/sewerage pollution problem. In this study, the reducer with a drywell structure is developed in order to prevent the oil leakage. The drywell structure is that the reducer bottom housing and the support column of an output shaft are united, and taper roller bearings are in the bottom housing. During the development of the reducer, a mockup and a prototype are made by using CAD and a high speed CNC machine. Then, to prove the performance of the prototype, the performance tests, unload working test and the mechanical torque efficiency test, are conducted by the torque meter device. Also a motor velocity(rpm) control system
is developed by a PID control according to the working loads(MLSS data). The results of the test are shown that the maximum torque efficiency is 88.45%, the oil leakage and the abnormal noise do not occur during the work. Therefore the reducer with the drywell structure and the motor rpm PID control system is successfully developed.

목차

Abstract
 1. 서 론
 2. 교반기의 개요
  2. 1 교반기의 특성
  2. 2 감속기의 특성
 3. 누유방지(Drywell) 구조 감속기 설계
  3. 1 감속기 설계 요구 조건
 4. 설계도 및 시제품 제작
  4. 1 2D-CAD 설계
  4. 2 3D-CAD 설계
  4. 3 실물 크기 모형 제작
  4. 4 시제품 제작
 5. 감속기 모터 rpm 제어시스템 개발
  5.1 PID 제어시스템
  5. 2 모터 rpm 제어시스템
 6. 시제품의 성능평가
  6. 1 성능평가 시험 장치
  6. 2 무부하 작동 시험
  6. 3 토크 전달 효율 시험
 7. 결 론
 참고문헌

저자정보

  • 오상엽 S. Y. OH. 상주대학교 자동차공학과

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.