earticle

논문검색

신체밀착형 원피스 프로토타입 패턴개발 - 20대 C컵 여성을 중심으로 -

원문정보

Development of Tight-Fitting One Piece Prototype Pattern - Focused on women in their 20’s who wear a C cup -

이은영, 오순, 김정실

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

Background This study is aimed at developing tight-fitting one piece prototype pattern for ready-made clothes in consideration of the characteristic of body type of women in their twenties who wear a C cup that has recently increased with westernized body type, and utilizing it as reference pattern design of various one piece items. Methods First, based on the 3D body scan data done by the 6th Size Korea(2010), 208 women in their 20s were analyzed. The collected data were carried out by using SPSS 2.0. Result To verify tight-fitting shape one piece prototype design pattern, it was virtually fitted onto both the CLO 3D avatar and the actual 3D human body. This 3D human body, construction line, ease and fit were proper but it was fitted worse than standard human body owing to asymmetric nature and posture factor of the human body. However, it was thought to be caused by characteristics of the human body, and thus it was deemed available as tight-fitting shape ready-made clothes for C cup body type and A cup body type. Conclusion In this study, tight-fitting shape one piece prototype pattern was designed for women who wear a C cup. This pattern involves a limitation that it may not be compared with actual fitting due to fitting test through virtual fitting instead of actual fitting. Therefore, further studies are required to be made for developing a grading rule in order to see fit even in a tall avatar that is generally used in virtual fitting.

한국어

연구배경 본 연구는 체형의 서구화로 인하여 최근 증가하고 있는 20대 C컵 여성의 체형특징을 고려하여 기성복용 신체밀착용 원피스 프로토타입 패턴을 개발하고자 20대여성의 체형을 분석하였다. 평균체형(A컵)을 선정하여 C컵 체형과 비교한 후 패턴제도를 위한 선행연구패턴을 선정하여 착용평가를 통해 기준패턴으로 설정하였다. 설정된 패턴으로 신체밀착용 원피스 프로토타입 패턴을 가상착의를 통해 검증하였다. 연구방법 인체 측정방법은 제 6차 한국인 인체치수조사 사업(Size korea, 2010)에 준하여 측정된 결과 중 3차원 인체형상 자동측정항목을 성인여성 20세~29세 208명의 데이터를 사용하여 분석하였다. 본 연구의 자료는 SPSS 20.0을 이용하여 통계처리 하였다. 연구결과 신체밀착형 원피스 프로토타입 설계패턴을 검증하기 위해 CLO 3D상의 아바타와 실제3차원 인체형상에 가상착의 하였다. 실제3차원 인체형상에 가상 착의한 결과 구성선, 여유분 및 맞음새는 적당하였으나, 인체의 비대칭성과 자세요인으로 인해 표준인체형상보다는 낮은 맞음새를 보였다. 인체의 특성으로 인한 것으로 판단되어 C컵 체형과 A컵 체형을 위한 실체밀착형 기성복 원피스 패턴으로 사용가능한 것으로 판단되었다. 결론 본 연구를 통해 개발된 신체밀착형 원피스 프로토타입 패턴은 현재 체형의 서구화로 인하여 최근 증가하고 있는 20대 C컵 여성의 체형특징을 고려하여 다양한 기성복용 원피스 아이템의 패턴 설계의 기준패턴으로 활용될 것이라 기대된다.

목차

논문요약
 Abstract
 1. 서론
 2. 이론적 배경
  2.1. 20대 여성의 소비자 특성
  2.2. 20대 여성의 체형에 관한 선행연구
  2.3. 20대 여성의 가슴에 관한 선행연구
  2.4. 원피스 프로토타입 패턴에 관한 선행연구
 3. 연구방법 및 절차
  3.1. 연구내용
  3.2. 체형연구자료
  3.3. 자료처리 및 분석
 4. 연구결과 및 고찰
  4.1. 20대 여성의 신체밀착형 원피스 프로토 타입 패턴을 위한 체형분석
   4.1.1. 20대 여성의 기술통계분석에 의한 체형분석
   4.1.2. C컵 여성의 체형분석
  4.2. 신체밀착형 원피스 프로토타입 패턴개발
   4.2.1. 선행연구 프로토타입패턴의 설계방법 비교
   4.2.2. C컵 신체밀착형 원피스 프로토타입패턴 설계방법 개발결과
  4.3. 신체밀착형 원피스 프로토타입 패턴 검증 방법
   4.3.1. CLO3D 아바타에 의한 패턴 검증결과
   4.3.2. 체형별 인체형상 데이터의 의한 패턴 검증결과
 5. 결론
 참고문헌

저자정보

  • 이은영 Li, Eun Yeong. 가천대학교 의상학과 석사
  • 오순 Oh, Soon. 가천대학교 예술대학 미술디자인학부(패션디자인) 교수
  • 김정실 Kim, Jung-Sil. 가천대학교 예술대학 미술디자인학부(패션디자인) 교수

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.

      0개의 논문이 장바구니에 담겼습니다.