earticle

논문검색

한천-아크릴아마이드 미생물 고정화법에 의한 폐수 중 폴리비닐알콜의 분해

원문정보

Degradation of Polyvinyl Alcohol in Dye-Processing Wastewater by Agar-Acrylamide Microbial Immobilization Method

김재훈, 김정목, 조무환

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

For the treatment of poorly biodegradable polyvinyl alcohol(PVA) in dye-processing wastewater, immobilized microbial beads were prepared by uslng agar-acrylamide method. PVA removal efficiency for the synthetic wastewater was 85% at the PVA volume loading rate of 3.1g/l day. In case of real desizing wastewater, PVA removal efficiency was 81.3% at the PVA volume loading rate of 3.25g/l day. In observation of cross section of immobilized bead passed 5 months with diameter of 2.4mm, the growth of cell was limited by the resistance of substrate and oxygen transfer for the inners region of more than 48% of bead radius from the surface. It was estimated that 70% of total removed PVA was degraded by the immobilized cells in the continuous immobilized reactor. Substrate utilization rate in the suspended reactor was decreased with increasing dilution rates above 0.083 hr-1, but that in the immobilized reactor was increased with increasing dilution rates up to 0.125hr-1. The substrate removal efficiency of immobilized reactor was much superior to that of suspended reactor with increasing dilution rates. Saturation constant of substrate utilization rate equation, Ks was 6.6gPVA/l, and maximum specific substrate utilization. k was 0.175g PVA/g cell.hr

한국어

염색가공 폐수 중 난분해성 물질이 PYA를 처리 하기 위하여, 한천-acrylamide를 이용한 bead를 제 조한 후 air-lift 반응기에서 연속실험을 행하였다. 합성폐수의 PYA놓도가3,100mg/l . 체류시간 24hr일 때 유출수의 농도는 4500mg/l 이며, 제거효율은 85% 이상을 나타내었다. 실제 호발폐수의 경우 PYA 및 COD농도가 3,253mg/l, 4,500mg/l 일 때, 체류시간 24hr에서 유출수의 농도는 840mg/l,480mg/l 이며, 제거효 율은 81.3%와 85.2%로 각각 나타났다. bead의 지름이 lmm일 때는 내부의 미생물 성장 이 양호하였으나 bead의 지름이 2mm일 때는 기질 과 산소전달저항에 의하여 반지름의 48% 이상은 미 생물의 성장이 저해를 받았다. 고정화 반응기에서 전체 기질 제거속도 중 bead 내 고정화 cell의 제거 분율은 평균 70%로 나타났다. 현탁 반응기에서 희석율 이상에서는 기질 이용속도가 감소하였으나 고정화 반응기에서는 희석율 0.125hr-1까지 거의 선형척으로 증가하였다. PYA 제거속도식에서 포화상수 K1=6.60(gPVA/l)와 최대 비기질 이용속도 k=0.175(g PVA/g cell.hr)를 얻었다

목차

ABSTRACT
 서론
 실험재료 및 방법
  균주 및 배지조성
  분석방법
  포괄 고정화 방법
  회분실험
  연속실험
  PVA 생분해 속도론
 결과 및 고찰
  회분실험
  연속공정
  Bead 내부관찰
  PVA 생분해 속도론
 요약
 참고문헌

저자정보

  • 김재훈 Jae-Hoon Kim. 영남대학교 화학공학과
  • 김정목 Jeong-Mog Kim. 영남대학교 화학공학과
  • 조무환 Moo-Hwan Cho. 영남대학교 화학공학과

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.

      0개의 논문이 장바구니에 담겼습니다.