earticle

논문검색

제지폐수의 플럭강도 측정에 따른 고분자응집제 주입량 결정

원문정보

Determination of Dosage of Flocculants for Paper Wastewater Treatment by Measuring Floc Strength

조준형, 강미란

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

Actually, about 45% of total costs for wastewater treatment in a papermaking mill is spent for sludge disposal and the cost of chemicals used to improve the dewaterability of sludge takes much part of it. In order to reduce sludge disposal cost and to improve the efficiency of sludge treatment, it is necessary to minimize the amount of water contained within the sludge
and hence to improve the dewaterability of the sludge. The objective of this study was to elucidate the way of improving the dewaterability of sludge. Three types of wastewater from a tissue paper mill, a printing paper mill and a newsprint mill were used and two types of high molecular weight flocculants (anionic PAM and cationic PAM) were used to treat the wastewater.
Dewaterability of sludge was evaluated by measuring floc strength.

목차

ABSTRACT
 서론
 재료 및 방법
  공시재료
 실험방법
  플럭강도 측정방법
 실험결과
  고분자응집제 단독주입(single system)과 플럭 강도
  고분자 응집제 단독 주입에 따른 COD 및 SS 제거 효율
  고분자 응집제 혼합 사용에 따른 플럭 강도
  고분자 응집제 혼합 투입에 따른 COD 및 SS 제거효율
 결론
 인용문헌

저자정보

  • 조준형 Jun-Hyung Cho. 강원대학교 산림환경과학대학 제지공학과
  • 강미란 Mee-Ran Kang. 강원대학교 산림환경과학대학 제지공학과

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.
      ※ 학술발표대회집, 워크숍 자료집 중 4페이지 이내 논문은 '요약'만 제공되는 경우가 있으니, 구매 전에 간행물명, 페이지 수 확인 부탁 드립니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.