earticle

논문검색

QRev를 이용한 ADCP 이동측정법 유량측정 성과의 불확도 산정 및 분석

원문정보

Uncertainty Estimation and Analysis of ADCP Moving-Boat Discharge Measurements Using QRev

박석근, 김형수

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

The Acoustic Doppler Current Profiler (ADCP) enables rapid and efficient discharge measurements, but the separation and quantification of diverse error sources remain challenging, limiting the accurate estimation of uncertainty. To address this, various studies have been conducted, and the U.S. Geological Survey (USGS) developed the QRev software to estimate the uncertainty of ADCP discharge measurements. In this study, 12,852 ADCP moving-boat discharge measurements collected over the past three years from 407 gauging stations across Korea were analyzed using QRev to evaluate its applicability and to investigate uncertainty characteristics. The average uncertainty was assessed as ±9.85%, corresponding to a P grade according to the USGS classification. Component-wise analysis revealed strong correlations between increased uncertainty and both the coefficient of variation of discharge and mean velocity. Site-specific analysis showed that stations influenced by tidal effects, ephemeral streams, and dam or weir regulation exhibited higher uncertainty. The findings confirm the applicability of QRev for uncertainty assessment and highlight the need to establish uncertainty-based grading criteria tailored to the characteristics of hydrological surveys in Korea.

한국어

음향 도플러 유속계(ADCP)는 신속하고 효율적인 유량측정을 가능하게 하지만, 다양한 오차 요인을 분리하여 정량화하기 어려워 불확도 산정에 한계가 있다. 이를 해결하기 위해 여러 연구가 수행되었으며, USGS는 ADCP 유량측정 성과의 불확도 산정이 가능한 QRev 소프트웨어를 개발하였다. 본 연구에서는 QRev를 이용하여 전국 407개 유량관측소에서 최근 3년간 획득한 12,852개의 ADCP 이동측정법 유량측정 성과를 분석하여 활용성을 검토하고 불확도 특성을 분석하였다. 평균 불확도는 ±9.85%로 평가되었으며, USGS 기준 P등급에 해당하였다. 성분별 분석 결과, 유량 변동계수와 평균유속이 불확도 증가와 뚜렷한 상관관계를 보였고, 지점특성별로는 조위 영향, 건천화, 댐·보 영향을 받는 구간에서 높은 불확도가 산정되었다. 본 연구를 통해 QRev의 활용성과 향후 우리나라 수문조사 특성을 고려한 불확도 등급 기준 마련이 필요함을 확인하였다.

목차

요약
Abstract
1. 서론
2. QRev 불확도 산정 방법론
2.1 ADCP 이동측정법 유량 산정 방법
2.2 ADCP 이동측정법 유량측정 성과의 불확도 산정 방법
2.3 QRev 개요
2.4 QRev 불확도 산정 방법
2.5 USGS 유량측정 성과의 불확도 등급 평가 기준
3. QRev를 이용한 ADCP 이동측정법 유량측정성과 불확도 산정 및 분석
3.1 대상지점 및 측정자료
3.2 QRev를 이용한 ADCP 이동측정법 유량측정 성과불확도 산정
3.3 불확도 특성 분석
4. 결론
감사의 글
References

저자정보

  • 박석근 Seok Geun Park. 인하대학교
  • 김형수 Hung Soo Kim. 인하대학교

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,500원

      0개의 논문이 장바구니에 담겼습니다.