원문정보
Effect of Thermal Regeneration Temperature on Physical Properties and Adsorption Capacity of Regenerated Carbon
초록
영어
This study evaluated the recovery of adsorption capacity and the changes in physical properties of coal-based, coconut-based, and wood-based granular activated carbons (GACs) used in advanced water treatment processes, according to variations in furnace temperature, in order to determine the economic regeneration conditions. The results showed that the optimum regeneration temperature varied depending on the carbon type, appearing in the order of coal-based, coconut-based, wood-based carbon. As the temperature increased, the adsorption capacity initially improved but decreased sharply beyond a certain threshold temperature, while the deterioration of physical properties occurred at a relatively lower temperature. The inflection points of adsorption capacity were observed at 950 °C, 840 °C, and 545 °C for coal-, coconut-, and wood-based carbons, respectively, whereas the corresponding physical property inflection points were found at 880 °C, 820 °C, and 500 °C. These findings indicate that although adsorption capacity increases up to its inflection point, the physical integrity of the carbon gradually declines. Therefore, setting the regeneration temperature within the range between the physical and adsorption inflection points is considered the most economical and efficient operating condition for activated carbon regeneration.
한국어
고도정수처리에 사용되는 석탄계, 야자계, 목탄계 입상 활성탄을 대상으로 로 내 온도 변화에 따른 흡착능 회복과 물리적 특성 변화를 평가하여 활성탄의 경제적 재생 조건을 도출하였다. 연구 결과, 탄종별로 재생 온도 범 위가 다르며 석탄계, 야자계, 목탄계 순으로 높게 나타났다. 온도 상승에 따라 흡착능은 증가하다가 일정 한계 온도 이후 급격히 저하되는 변곡점이 확인되었으며, 물리적 특성의 저하는 이보다 낮은 온도에서 먼저 발생하였다. 흡착 능 변곡점은 석탄계 950 ℃, 야자계 840 ℃, 목탄계 545 ℃, 물리적 특성 변곡점은 석탄계 880 ℃, 야자계 820 ℃, 목탄계 500 ℃로 나타났다. 흡착능은 변곡점까지 향상되지만 물리적 특성은 점차 저하되므로, 물리적 변곡점과 흡착 능 변곡점 사이의 범위에서 재생 온도를 설정하는 것이 경제적이고 효율적인 운전 조건으로 판단된다.
목차
Abstract
Ⅰ. 서론
Ⅱ. 연구방법
2.1 연구대상
2.2 활성탄 재생 방법
2.3 분석 방법
Ⅲ. 결과 및 고찰
3.1 석탄계 활성탄의 재생결과
3.2 야자계 활성탄의 재생결과
3.3 목탄계 활성탄의 재생결과
3.4 활성탄의 종류별 재생특성 비교
3.5 활성탄 재생 경제성 검토
Ⅳ. 결론
REFERENCES
