earticle

논문검색

Original Article

설탕 기반 비활성 모의 폭발물의 제조와 특성평가

원문정보

Preparation and Characterization of Sugar-based Insert Explosives Simulants

이재성, 김찬휘, 심현수, 유상우, 이원주

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

This study was conducted to contribute to the development of Korea's security equipment industry by securing its own production technology for inactive simulated explosives in Korea, which relied only on overseas technology. In order to achieve the research objectives, inactive simulated explosives for three types of TNT, C4, and ANFO were produced based on sugar and statistically verified through comparison with actual explosives and commercial inactive simulated explosives to confirm the applicability in the field. As a research analysis method, it was confirmed whether the inactive simulated explosives manufactured using the CT X-Ray search equipment were recognized as actual explosives, and the effective atomic number was measured through the 2D X-ray search equipment. Then, the measured effective atomic number value was compared with the reference substance using a statistical technique. As a result of the study, the three types of inactive simulated explosives were recognized as actual explosives in the CT X-Ray search equipment and indicated effective atomic numbers between 6.75 and 6.90 in the 2D X-ray search equipment. In the independent sample T-test and variance analysis, there was no statistical difference from the reference substances at a significance level of 5%. In addition, it was possible to obtain a result that the quality of the inert simulated explosives manufactured through the Levene Test was uniform or relatively better compared to the reference material.

한국어

폭발물탐지장비의 개발, 시험, 점검 등을 안전하게 수행하기 위해서는 비활성 모의 폭발물의 사용이 현장에서 강하게 요구된다. 본 연구는 해외 기술에만 의존하던 비활성 모의 폭발물 제작기술을 국내에 자체 확보함으로써 우리나라 보안 장비 산업 발전에 이바지하고자 수행되었다. 연구목적을 달성하기 위해, TNT, C4, ANFO 3종에 대한 비활성 모의 폭발물을 설탕을 기반으로 제작하였고, 현장 적용 가능성을 확인하기 위해 실제 폭발물 및 상용 비활성 모의 폭발물과 비교를 통해 통계적으로 검증하였다. 연구분석방법으로 CT X-Ray 검색장비를 이용하여 제작된 비활성 모의 폭발물이 실제 폭발물로 인식되는지 확인하였고, 2D X-ray 검색장비를 통해 유효원자번호를 측정하였다. 이후 측정된 유효원자번호 값을 통계적 기법을 활용하여 기준물질과 비교하였다. 연구결과, 제작된 비활성 모의 폭발물 3종은 CT X-Ray 검색 장비에서 실제 폭발물로 인식되었으며, 2D X-ray 검색장비에서 약 6.75에서 6.90 사이의 유효원자번호를 나타냈다. 독립표본 T-test와 분산분석에서는 기준물질들과 유의수준 5%에서 통계적으로 차이가 없는 것으로 나타났다. 더하여, Levene Test을 통해 제작된 비활성 모의 폭발물의 품질이 기준물질과 비교하여 균일하거나 상대적으로 더 좋다는 결과를 얻을 수 있었다. 이 연구결과는 국내 보안 장비 산업의 자립성과 신뢰성 확보에 기여할 수 있으며, 향후 다양한 모의 물질 제작 및 탐지 알고리즘 테스트 분야로의 확장도 기대된다.

목차

[Abstract]
Ⅰ. 서론
Ⅱ. 연구방법
1. 실험재료
2. 비활성 모의 폭발물 제작
3. 분석방법
Ⅲ. 연구결과
1. 비활성 모의 폭발물의 색상과 밀도
2. 비활성 모의 폭발물의 완성도
Ⅳ. 결론
Acknowledgments
참고문헌

저자정보

  • 이재성 Jaeseong Lee. 한국산업기술시험원, 연구원
  • 김찬휘 Chanhwi Kim. 한국산업기술시험원, 연구원
  • 심현수 Hyun Su Sim. 한국산업기술시험원, 연구원
  • 유상우 Sangwoo You. 한국산업기술시험원, 센터장
  • 이원주 Wonjoo Lee. 한국산업기술시험원, 연구원

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,800원

      0개의 논문이 장바구니에 담겼습니다.