원문정보
초록
영어
In this paper, a Quadrature Voltage Controlled Oscillator of a wireless transceiver operating in the 5GHz UNII band of the wireless LAN 802.11a standard was proposed. In addition, a new structure of low-noise, low-power Quadrature Coupled VCO was proposed using the quadrature phase output as an input to the switching current source. If this structure is applied to other circuits such as a structure in which the current source is separated or a common use of a current source, a phase noise characteristic of 17 dB better than the existing VCO can be obtained. In particular, it is designed to operate with low power in a simple structure compared to the existing in-phase QVCO. The circuit was designed to operate with a supply voltage of 1.2V by the TSMC 0.13μm RF CMOS process. The measured VCO has a large tuning range of 20% operating at frequencies of 4.5 - 5.6 GHz, and phase noise of -117 dBc/Hz or less was obtained at the 1 MHz offset. The output phase error of the proposed QVCO was less than 0.5 degrees, and the total power consumption was able to obtain 5.3 mW at 1.2V.
목차
1. Introduction
2. QVCO proposed by Rofougaran
3. Proposed Low Noise Quadrature VCO Design
4. Current Reference (Iref) circuit for PVT variation
5. Conclusions
6. Futurework
Acknowledgement
References
