earticle

논문검색

Research Papers

Hydraulic-Thermal-Mechanical Properties and Radionuclide Release-Retarding Capacity of Kyungju Bentonite

원문정보

경주 벤토나이트의 수리-열-역학적 특성 및 핵종 유출 저지능

Jae-Owan Lee, Won-Jin Cho, Pil-Soo Hahn

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

Studies were conducted to select the candidate buffer material for a high-level waste (HLW) repository in Korea. This paper presents the hydraulic properties, the swelling properties, the thermal properties, and the mechanical properties as well as the radionuclide release-retarding capacity of Kyungju bentonite as part of those studies. Experimental results showed that the hydraulic conductivities of the compacted bentonite were very low and less than m/s. The values decreased with increasing the dry density of the compacted bentonite. The swelling pressures were in the range of 0.66 MPa to 14.4 ㎫ and they increased with increasing the dry density. The thermal conductivities were in the range of 0.80 ㎉/m to 1.52 ㎉/m . The unconfined compressive strength, Young's modulus and Poison's ratio showed the range of 0.55 ㎫ to 8.83 ㎫, 59 ㎫ to 1275 ㎫, and 0.05 to 0.20, respectively, when the dry densities of the compacted bentonite were 1.4 Ms/㎥ to 1.8 Mg/㎥. The diffusion coefficients in the compacted bentonite were measured under an oxidizing condition. The values were $1.7{\times}10^{-10}/s to 3.4{\times}10^{-10}/s for electrically neutral tritium (H-3), 8.6{\times}10^{-14}/s to 1.3{\times}10^{-12}/s for cations (Cs, Sr, Ni), 1.2{\times}10^{-11}/s to 9.5{\times}10^{-11}/s for anions (I, Tc), and 3.0{\times}10^{-14} /s to 1.8{\times}10^{-13}/s $for actinides (U, Am), when tile dry densities were in the range of 1.2 Mg/㎥ to 1.8 Mg/㎥. The obtained results will be used in assessing the barrier properties of Kyungju bentonite as a buffer material of a repository in Korea.n Korea.

한국어

고준위방사성폐기물 처분장의 완충재 후보물질 선정을 위해 경주 벤토나이트를 대상으로 수리특성, 팽윤특성, 열적특성, 역학특성 및 핵종유출 저지특성을 조사하였다. 실험결과, 압축 벤토나이트의 수리전도도는 m/s 이하로 매우 낮았으며 건조밀도가 증가할수록 감소하였다. 팽윤압은 0.66 ㎫∼14.4 ㎫ 사이의 값을 보였으며 건조밀도에 따라 증가하였다. 건조밀도가 1.4 Ms/㎥ ∼ 1.8 Mg/㎥1.4 일때, 열전도도, 열축압축강도 (unconfined compressive strength), 탄성계수 (Young's modulus of elasticity), Poisson 비는 각각 0.80 ㎉/m ∼1.52 ㎉/m , 0.55 ㎫ ∼ 8.83 ㎫, 59 ㎫ ∼ 1275 ㎫, 0.05 ∼ 0.20의 값을 나타내었다. 압축벤토나이트에 대한 핵증 확산계수는 산화 환경에서 측정되었으며, 주어진 실험조건에서 삼중수소 (H-3)는 1.7 /s ∼ 3.4 /s. 양이온 핵종 (Cs, Sr , Ni)은 8.6 /s ∼ 1.3 /s, 음이온 핵종 (I, Tc)은 1.2 /s ∼ 9.5 /s, 악티나이드 핵종은 3.0 /s ∼ 1.8 /s 사이의 값을 나타내었다. 이때 확산계수는 모든 핵종에 대해 압축벤토나이트의 건조밀도가 증가할수록 감소하는 경향을 보였다.

목차

Abstract
 요약
 I. Introduction
 II. Kyungju Bentonite
 III. Hydraulic Propertles
 IV. Swelling Properties
 V. Thermal Properties
 VI. Mechanical Properties
 VII. Radionuclide Release-Retarding Capacity
 VIII. Conclusions
 Acknowledgement
 References

저자정보

  • Jae-Owan Lee 이재완. 한국원자력연구소
  • Won-Jin Cho 조원진. 한국원자력연구소
  • Pil-Soo Hahn 한필수. 한국원자력연구소

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.

      0개의 논문이 장바구니에 담겼습니다.