earticle

영어

Purpose: This study aims to verify structural stability by manufacturing a 40m full-scale specimen composed of a segmental U-shaped PSC girder with integrated tensioning systems and a concrete slab, proceeding dynamic behavior tests, and compare the results of the tests with the results of numerical analysis. Method: Dynamic behavior tests were conducted on a full-scale, undamaged specimen using an impact hammer, and the natural frequency and damping ratio were measured and compared with numerical analysis techniques and the general damping ratio of the facilities. Result: The natural frequency of the numerical analysis model consisting of a girder and slab composite section was calculated to be 2.561Hz, the natural frequency of the full-scale specimen was measured to be 2.670Hz, and the damping ratio was calculated to be 0.42~0.68%. Conclusion: The natural frequency of the full-scale specimen was found to be 4.3% larger than that of the numerical analysis model. Since the masses of the full-scale specimen and the numerical analysis model are the same as 99.97%, it can be derived that the stiffness of the full-scale specimen has secured structural safety and stability. As a result, the dynamic behavior stability of the specimen was verified. The measured damping ratio of 0.42~0.68% was found to be a stable dynamic behavior compared to the PSC structures damping ratio of 0.5~1.0% in the elastic region.

한국어

연구목적: 본 연구는 복합 긴장 방식이 적용된 세그멘탈 PSC U형 거더와 콘크리트 바닥판 슬래브가 합 성된 40m 실대형 실험체를 제작하여 동적 거동 실험을 실시하고 수치해석적기법 결과와 비교 검토함 으로써 구조적 안정성을 검증하고자 한다. 연구방법: 손상이 없는 실대형 실험체에 impact hammer 타 격으로 동적 거동 실험을 실시하여 고유진동수와 감쇠비를 측정하고 수치해석적기법 및 구조물의 일 반적인 감쇠비와 상호 비교 검토하였다. 연구결과: 거더와 슬래브 합성단면으로 구성된 수치해석 모델 의 고유진동수는 2.561Hz로 계산되었고 실대형 실험체의 고유진동수는 2.670Hz로 계측되었으며 감쇠 비는 0.42~0.68%로 산정되었다. 결론: 실대형 실험체 고유진동수는 수치해석 모델의 고유진동수 대비 약 4.3% 증가된 값으로써 실대형 실험체와 수치해석 모델의 질량이 동일하므로(99.97%) 실대형 실험 체 강성은 구조적 안전성을 확보하였음을 도출할 수 있으며 결과적으로 실험체의 동적 거동 안정성을 검증하였다. 계측된 감쇠비 0.42~0.68%는 탄성영역의 PSC구조물 감쇠비 0.5~1.0%와 비교하여 볼 때, 안정적 동적 거동임을 확인하였다.