earticle

논문검색

論文

도플러 레이더 시스템용 VCO 설계 및 제작

원문정보

Design and Implementation of a VCO for Doppler Radar System

김용환, 김현진, 민준기, 유형수, 이형규, 홍의석

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

In this paper, a VCDRO(Voltage Control Dielectirc Resonator Oscillator) for signal source of doppler radar system is designed and fabricated. The proposed VCDRO is made with new tuning mechanism using CPW line. The coplanar waveguide of /2 in length with varactor diode is placed on the metallization side under the dielectric resonator and coupled to it. Tuning varactor diode is mounted at one end of the CPW. The proposed circuit tuned by a CPW allows one more varactor diode to be mounted on the optimized CPW, where a greater sensitivity of frequency tuning is needed. With varying the biasing voltage for the varactor diode from 0 V to 15 V, output frequency tuning of 12 MHz is obtained. The PLDRO exhibits output power of 16.5 dBm with phase noise in the phase locked state characteristic of -115 dBc/Hz at 100 Hz, -105 dBc/Hz at the 10 kHz, and -102 dBc/Hz at 1 Hz offset from 10.525 GHz , respectively.

한국어

본 논문에서는 도플러 레이더 시스템의 신호원이 되는 전압제어 발진기를 설계 및 제작하였다. 제안된 VCDRO는 CPW라인 형태를 이용하여 동조시키는 새로운 방법을 이용하였다. 유전체 공진기 기판 됫면에 바랙터 다이오드가 실장된 /2 길이를 갖는 CPW 회로를 구현하여 유전체공진기와 커플링을 시켰다. 바랙터 다이오드는 CPW 한쪽 끝에 실장을 하였다. 제안된 CPW 동조회로는 여러 개의 다이오드를 실장 할 수 있어 동조대역폭을 쉽게 늘일 수 있다. 동조된 전압제어 발진기는 바랙터 다이오드의 전압을 015V 로 가변시 12MHz 의 동조대역폭을 나타내었다. 제안된 CPW라인으로 동조된 위상고정 유전체 발진기는 10.5250Hz에서16.5dBm의 출력을 나타내었으며, 위상잡음은 -l15dBc/Hz@100kHz,-105dBcHz@10kHz,-102dBc/@1kHz 의 위상잡음 특성을 나타내었다.

목차

요약
 Abstract
 I. 서론
 II. 기본이론
  1. 코플래너 웨이브가이드(CPW) 구조
  2. 전압제어 발진기의 주파수 동조
 III. CPW라인으로 동조된 VCO 설계 및 제작
 IV. 실험 및 결과
 V. 결론
 참고문헌

저자정보

  • 김용환 Yong-Hwan Kim. 광운대학교 전파공학과 박사과정
  • 김현진 Hyun-Jin Kim. 광운대학교 전파공학과 박사과정
  • 민준기 Jun-Ki Min. 광운대학교 전파공학과 박사과정
  • 유형수 Hyung-Soo Yoo. 광운대학교 전파공학과 박사과정
  • 이형규 Hyung-Kyu Lee. 광운대학교 전파공학과 박사과정
  • 홍의석 Ui-Seok Hong. 광운대학교 전파공학과 교수

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.