원문정보
Material Characteristics and Manufacturing Techniques Interpretation for the Casting Molds from the Silla Urban Site of Hwangnyongsa in Gyeongju, Korea
초록
영어
This study investigates the material characteristics of casting molds found at the Silla urban site of Hwangnyongsa in Gyeongju to interpret manufacturing techniques of casting mold for bronze used in the Unified Silla period. The casting molds appear to be earthen molds for bronze-making, with a thick ceramic wall and are classified into inner and outer mold types. The molds show a layered structure, with a silt layer thinly applied to the earthen mold surface. This layer comes into contact with melted metal during bronze manufacturing and is located on the outside of inner molds and inside of outer molds. The paste layer exhibits fine-grained texture with a bimodal structure. Thin section analysis reveals planar voids in the paste, which were made by the carbonization of rice husks used as a temper during the firing process. The silt layer is mainly composed of very fine-grained quartz and feldspars without clay and plant tempers. It is estimated that the casting molds were made by mixing soil with tempers of minerals and rice husks, applying a silt layer to the surface of the molds, and experiencing temperatures below 1,000℃. Overall, the selection of different raw materials for each layer of the molds is connected with efficiency to ensure the permeability and thermal resistance during the casting process and easy release of the bronze object from the molds.
한국어
이 연구에서는 신라 통일기 경주 황룡사 남쪽담장 외곽 정비사업부지 내 유적에서 출토 된 토제용범의 재료 특성을 조사하고 당시 제작기술을 해석하고자 하였다. 토제용범은 청동제 유물을 제작하기 위한 사형주조범으로 판단되며 두꺼운 기벽을 형성하고, 내범과 외범으로 구 분된다. 용범 단면은 태토 위에 미사가 얇게 도포된 층위구조를 보이는데, 이 미사층은 주조 시 청동기물과 맞닿는 면으로 외범은 내면에, 내범은 외면에 분포한다. 용범의 태토는 미정질 기질에 이중모드의 입도 분포를 보이는 세립질 광물을 다량 포함한다. 또한 선형의 긴 공극이 두드러지게 관찰되는데, 비짐으로 첨가된 볍씨 껍질이 소성 시 탄화되어 형성된 것으로 판단된 다. 미사층은 태토층과 구성광물이 유사하나 식물비짐이 없고 분급이 양호한 초세립질 석영과 장석으로 구성된 미사로 확인된다. 따라서 토제용범은 토양에 볍씨 껍질과 광물을 혼합한 태토 로 기형을 만든 후, 미사를 표면에 도포하여 제작된 것으로 생각되며, 1,000℃ 이하의 열을 경험 하였을 것으로 생각된다. 용범은 청동 주조 시 통기성과 내열성을 확보하고, 기물을 용범에서 쉽게 이탈시키기 위해 층위별로 재료를 다르게 선택하여 제작한 것으로 판단된다.
목차
ABSTRACT
1. 서론
2. 연구 대상 및 방법
2.1. 연구대상
2.2. 연구방법
3. 분석결과
3.1. 물리적 특성
3.2. 광물학적 특성
3.3. 화학적 특성
4. 고찰
4.1. 토제용범의 재료 특성
4.2. 토제용범의 구조와 제작기술
5. 결론
사사
REFERENCES