원문정보
A Study of Structural Performance for Tension Joint of Steel Pipes
초록
영어
This study is an experimental study to investigate the performance of steel pipe flange joints, including theoretical yield and breaking strength formula, material test, and linear finite element analysis results. A total of 12 specimens with the various thickness of the flange plate and the number of joint bolts as variables (flange thickness: 3.2, 4.0, 4.5 mm, number of bolts: 4, 6) were prepared and a unidirectional tensile test was conducted. In order to investigate the performance of the joint, the plate thickness was designed to be thinner than the general case in order to induce flange fracture. When the flange thickness was the same, the yield strength and maximum strength increased as the number of bolts increased. However, when the flange thickness increased when the number of bolts was the same, the yield strength increased, but the joint stiffness increased and the maximum strength showed a tendency to decrease. Flange plate fracture was induced, but in the case of the specimen with 6 bolts, the steel pipe was fractured earlier than flage plate.
목차
1. 서론
1.1 연구배경 및 목적
1.2 연구범위 및 방법
2. 이론적 고찰
3. 재료 및 인장실험
3.1 재료실험
3.2 실험체 제작 및 인장실험 계획
3.3 하중-응력 곡선
3.4 실험체 파괴양상
3.5 접합부 강성
4. 접합부 구조해석
4.1 해석 모델
4.2 해석결과
5. 결론
REFERENCES