원문정보
SSPA Development of 100W Class in Ka-band
초록
영어
In this paper, a 100 W SSPA in Ka-band was developed by combining 16 GaN MMICs which were 10 W amplifiers, respectively. The gate voltage of SSPA was controlled to minimize the effect of SSPA noise on the receiver during the receiving time. And the transmit power could be reduced about 20 dB to prevent the receiver from being saturated by a large signal from a nearby target. At 10%, 40% duty rato, the peak power and the power efficiency at center frequency were measured 52.4 dBm, 19.2%, and 51.6 dBm, 16.6% respectively.
한국어
본 논문에서는 10 W급 전력증폭 GaN MMIC(Microwave Monolithic Integrated Circuit)를 16개 전력 결합 하여 100 W급 Ka대역 SSPA(Soild State Power Amplifier)를 개발하였다. 개발된 SSPA를 하나의 안테나를 이용하여 송수신을 하는 Ka 대역 소형 레이다에 적용을 위해 수신 구간에 MMIC 게이트 전원을 제어하여 SSPA 잡음이 수신기에 미치는 영향을 최소화 하였다. 또한 근접한 표적의 큰 수신신호에 의해 수신기가 포화되는 것을 막기 위해 SSPA의 출력 전력을 약 20 dB 감소시키는 기능을 추가하였다. 개발된 SSPA는 10%, 40% 듀티비의 펄스 조건에서 각각 52.4 dBm, 51.6 dBm 이상의 첨두전력을 출력하였으며, 이때 전력효율은 각각 19.2%, 15.8% 이상이다.
목차
Abstract
Ⅰ. 서론
Ⅱ. Ka 대역 SSPA 개발
1. 송신 출력 전력
2. 펄스 OFF 시 잡음 준위(NSSPA,1)
Ⅲ. 결론
References
