원문정보
Oscillation Mode and Grating Phase in DFB Laser Diode with an Anti-reflection Coated Mirror
초록
영어
In this paper, when a gain grating and a refractive index grating exist simultaneously in a DFB laser diode having a wavelength of 1.55 μm, an anti-reflection coating is applied to the right mirror surface so that Pr=0. In case of δL < 0 , the characteristics of the oscillation frequency and oscillation gain have been analyzed. Whenever the phase of the grating on the left side of the mirror continuously decreases by π/2, the δL value of each oscillation mode decreases by about 0.6 to the left of the graph lines of each oscillation mode. The case of the oscillation mode having the lowest threshold gain is the case of kL = 10, and in this case, the mode selectivity is relatively low compared to the case of other values of kL. From kL = 0.1 to kL = 6, the mode selectivity and the frequency stability are excellent. As the mode selectivity is excellent, the frequency stability is excellent. Compared to the case with two cleaved mirrors, the DFB laser diode with anti-reflection coating increases the threshold gain of the oscillation mode by about 2 times, but the mode selectivity becomes about 2 times better.
한국어
본 연구에서는 1.55um의 파장을 갖는 DFB 레이저 다이오드에서 이득 격자와 굴절률 격자가 동시에 존재할 때, 오른쪽 거울면에 무반사 코팅을 하여 Pr=0 이 되도록 하였다. δL < 0 인 경우일 때, 발진 모드에 대하여, 발진 주 파수와 발진 이득의 특성을 해석했다. 좌측 거울면 상에서 격자의 위상이 π에서부터 π/2 씩 연속적으로 감소할 때마 다, 각 발진 모드의 (αL, δL) 그래프 선들이 좌측으로 δL 값이 약 0.6 정도씩 낮아지고 있음을 볼 수 있다. 문턱 이득이 가장 낮은 발진 모드의 경우는 kL = 10인 경우이고, 이때 모드 선별성은 다른 kL 값의 경우와 비교할 때 상대적으로 낮다. 모드 선별성이 우수한 경우는 kL = 0.1에서부터 kL = 6 정도까지이고, 모드 선별성이 우수할수록 주파수 안정성이 우수하다. 두 개의 벽개면을 갖는 경우와 비교하면, 무반사 코팅을 한 DFB 레이저 다이오드는, 발 진 모드의 문턱 이득은 약 2배 정도로 높아지지만 모드 선별성 측면은 2배 정도 더 우수해 진다.
목차
Abstract
Ⅰ. 서론
Ⅱ. 이론적 배경
Ⅲ. 시뮬레이션 결과
Ⅳ. 결론
References