earticle

논문검색

U-밴드 관 내부 나노유체의 강제대류에 관한 수치적 연구

원문정보

Numerical Study of Forced Convection Nanofluid in a U-Bend Tube

조성원, 최훈기, 박용갑

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

Fluid flow and thermal characteristics of laminar nanofluid(water/Al2O3) flow in a circular U-bend tube have been studied numerically. In this study, the effect of Reynolds number and the solid volume fraction and the impact of the U-bend on the flow field, the heat transfer and pressure drop was investigated. Comparisons with previously published experimental works on horizontal curved tubes show good agreements between the results. Heat transfer coefficient increases by increasing the solid volume fraction of nanoparticles as well as Reynolds number. Also, the presence of the secondary flow in the curve plays a key role in increasing the average heat transfer coefficient. However, the pressure drop curve increases significantly in the tubes with the increase in nanoparticles volume fraction.

한국어

원형단면 U-밴드 튜브에서 층류인 나노유체(물/Al2O3)의 유동 및 열적 특성을 수치적으로 연구하였다. 이 연구에서는 U-밴드 내부유동에서 Reynolds 수와 고체 체적분율의 영향이 유동장, 열전달 및 압력강하에 미치 는 영향을 연구했다. 원형곡관에 대한 이전에 발표된 실험 결과와 본 수치해석의 결과가 잘 일치함을 보여 해석방 법의 타당성이 있음을 확인하였다. Reynolds 수 뿐만 아니라 나노입자의 고체 체적분율을 증가시키면 열전달계수 도 증가함을 보였다. 또한 곡관에서 형성되는 2차 유동은 평균 열전달계수를 높이는 데 중요한 역할을 한다. 그러 나 압력강하 곡선은 나노입자 농도가 증가함에 따라 크게 증가함을 보였다.

목차

요약
Abstract
1. 서론
2. 수치해석 방법
2.1 형상 정보 및 지배방정식
2.2 나노유체의 물성치
2.3 경계조건
2.4 수치해석 검증
3. 결과 및 고찰
3.1 속도 및 온도분포
3.2 대류 열전달계수
3.3 열전달율
3.4 압력 강하
4. 결론
REFERENCES

저자정보

  • 조성원 Sung-Won Jo. 창원대학교 스마트제조융합협동과정 대학원생
  • 최훈기 Hoon-Ki Choi. 창원대학교 기계공학부 교수
  • 박용갑 Yong-Gap Park. 창원대학교 기계공학부 교수

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.