earticle

논문검색

<학술연구>

액화 헬륨 조건에서 극저온 접착제 Lap shear strength test 시 기계물성 변화 및 실험 개선에 대한 연구

원문정보

Research for Change of Mechanical Properties of Cryogenic Adhesive with Lap Shear Strength Test in Liquified Helium Condition and Improvement of Test

표창민, 김성환, 김재웅

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

Conversion to modern hydrogen energy is required, and research on liquefied hydrogen cargo containment systems is needed for large-capacity transport and storage. In this study, changes in the mechanical properties of the adhesive required for storage and transport in liquid hydrogen were confirmed. The lap shear test was performed by realizing cryogenic conditions in a small chamber using liquid nitrogen and liquid helium. There was an increase of 11.0% in the -180℃ condition compared to room temperature, and an increase of 1.8% in the -230℃ condition compared to the -180℃ condition was confirmed. In the case of shear strain, it is known that it decreases as the temperature goes down. As a result of the experiment, it was confirmed that the value at room temperature and the value at -180℃ reduced the shear strain by 5.0%, and -230˚ compared to the -180℃ condition. An increase of 1.5% was confirmed in the C condition. In the case of the specimen tested at -230℃, the deformation in the gripper part was larger than in other tests, and it is judged that the maximum shear strength and shear strain were affected. In addition, in this study, there is a limitation in the experiment at -230°C rather than 253°C, which is the boiling point of hydrogen.

목차

ABSTRACT
1. 서론
2. 실험 방법
2.1 실험 시편
2.2 저속 변형 속도 시험(SSRT)
3. 실험 결과
4. 논의 및 시험 개선 사항
5. 결론
후기
References

저자정보

  • 표창민 Chang-Min Pyo. Korea Institute of Industrial Technolgy
  • 김성환 Sung-Hwan Kim. Korea Institute of Industrial Technology
  • 김재웅 Jae-Woong Kim. Korea Institute of Industrial Technology

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.