원문정보
Design and fabrication of Ka-band 100W SSPA using spatial combiner
초록
영어
In this paper, a study was conducted to produce 20W by combining a 10W MMIC and raising the unit power amplifier to 100W SSPA by combining the 8-way spatial coupler. SSPA requires low-loss, high-efficiency coupling techniques to meet high output with the output of a single element relatively low compared to TWTA. Designed and produced in this paper, the SSPA was manufactured as a 100W SSPA by mounting eight 20W high-power amplification modules in an 8-way spatial coupler with a reflection loss of 20dB or more and an excellent coupling efficiency of 94% or more. When -10dBm was applied, it was 112.2~169.8W at 20kHz 20%, 125.9~173.8W at 400kHz 40%, 117.5~162.2W at 800kHz 40%, showing performance of over 60dB and over 100W in all three PRF conditions.
한국어
본 논문에서는 10W급 MMIC를 결합하여 20W급으로 상향시킨 단위 전력 증폭기를 8-way 공간결합기와 결합 하여 100W급 SSPA를 제작하는 연구를 진행하였다. SSPA는 TWTA에 비해 상대적으로 낮은 단일 소자의 출력으로 높 은 출력을 충족하기 위해 저손실, 고효율의 결합 기술을 필요로 한다. 본 논문에서 설계 및 제작된 SSPA는 20dB 이상의 반사 손실과 94% 이상의 우수한 결합효율을 갖는 8-way 공간결합기에 20W급 고출력증폭모듈 8대를 장착하여 100W 급 SSPA로 제작되었다. –10dBm 인가시 20kHz 20%에서 112.2~169.8W, 400kHz 40%에서 125.9~173.8W, 800kHz 40%에서 117.5~162.2W로 나타나 PRF 3가지 조건에서 모두 이득 60dB 이상과 100W 이상의 성능을 보였다.
목차
Abstract
Ⅰ. 서론
Ⅱ. SSPA 구성품 설계
1. 고출력증폭모듈
2. 8-way 도파관 공간 결합기
Ⅲ. SSPA 구성품 제작
1. 고출력증폭모듈
2. 8-way 도파관 공간 결합기
Ⅳ. SSPA 제작 및 시험
Ⅴ. 결론
References