원문정보
A study on the design of an accident prevention system using an acceleration sensor
초록
영어
In this paper is a study on system design to prevent accidents using accelerometers. A switching power FET was configured at the power supply stage, and DC-DC converter, a regulator, and an LDO were designed for the power supply. In order to solve the power problem at once, it was divided into two parts, and a 3-axis accelerometer was designed to extract motion information to safely prevent accidents. Microprocessor enables communication through I2C and UART communication ports, and enables debugging through J-LINK. As a result of measuring the acceleration sensor data, it was confirmed that the power is normally cut off to prevent accidents when motion at an angle of 30 〫or more is detected.
한국어
본 논문은 3축 가속도센서를 이용한 사고를 방지하기위한 시스템 설계에 관한 연구이다. 전원 공급단에 스위칭 파워 FET를 구성하였고, 전원 공급장치는 DC-DC, 레귤레이터, LDO를 설계하였다. 전원 문제를 한번에 해결하기 위해 2원화를 하였으며, 3축 가속도 센서를 설계하여 움직임 정보를 추출하여 안전하게 사고를 예방할 수 있도록 설계하였다. 마이크로프로세서는 I2C, UART 통신 포트를 통해 통신할 수 있도록 하였으며, J-LINK를 통해 디버깅 할 수 있도록 하였다. 가속도 센서 데이터 측정결과 30° 이상의 각도의 움직임을 감지했을 때 정상적으로 사고 방지를 위해 전원이 차단되는 것을 확인 할 수 있었다.
목차
Abstract
Ⅰ. 서론
Ⅱ. 시스템 구성
Ⅲ. 시스템 설계
Ⅳ. 제작 및 측정
Ⅴ. 결론
References