earticle

논문검색

디바이스와 모듈

전력변환장치 설계를 통한 연료전지 발전시스템 구성

원문정보

Configuration of Fuel Cell Power Generation System through Power Conversion Device Design

윤용호

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

Recently, the demand for electricity is gradually increasing due to the rapid industrial development and the improvement of living standards. In the case of Korea, which is highly dependent on fossil fuels due to such a surge in electricity demand, reduction and freezing of greenhouse gas emissions due to international environmental regulations will immediately lead to a contraction in industrial activities. Accordingly, there are many difficulties in competition with advanced countries that want to link the environment with the country's industrial production activities, and the development of alternative energy as a countermeasure is of great interest around the world. Among these new power generation methods, small-scale power generation facilities with relatively small capacity include photovoltaic generation, wind power generation, and fuel cell generation. Among them, the fuel cell attracts the most attention in consideration of continuous operation, high power generation efficiency, and long-term durability, which are important factors for practical use. Therefore, in this paper, the fuel cell power generation system was researched and constructed by designing the power conversion circuit necessary to finally obtain the AC power used in our daily life by using the DC power generated from the fuel cell as an input.

한국어

최근 급속한 산업 발달과 생활수준의 향상으로 인하여 전력 수요가 점차 증대되고 있고 이러한 전력수요 급증에 의해 화석연료 의존도가 높은 우리나라의 경우 국제환경 규제에 의한 온실가스 배출량의 감축 및 동결은 바로 산업 활동 의 위축을 가져오게 된다. 이에 따라 환경을 국가의 산업생산 활동과 연계시키고자 하는 선진국과의 경쟁에서 많은 어려 움이 발생하고 있고 이에 대한 대책으로 대체 에너지의 개발이 세계적으로 큰 관심거리가 되고 있다. 이러한 새로운 발전방식 중 비교적 용량이 작은 소규모의 발전설비는 태양광발전 (Photovoltaic generation), 풍력발전 (Wind power generation), 연료전지발전 (Fuel cell generation) 등이 있다. 그중 실용화에 있어서 중요한 요소인 연속운전 및 높은 발전효율, 장기적인 내구성을 고려할 때 가장 주목을 받는 것이 연료전지이다. 연료전지 기술은 화석연료 사용에 따른 공해요인의 제거 및 전력산업 구조조정에 따른 분산형 전원으로서 개발 및 보급 가능성이 큰 새로운 형태의 발전방 식으로 주목받고 있다. 따라서 본 논문에서는 연료전지에서 발생하는 직류전원을 입력으로 하여 최종적으로 우리 일상생 활에서 사용하는 교류전원을 얻는 데 필요한 전력변환 회로를 설계하여 연료전지 발전시스템을 연구 및 구성하였다.

목차

요약
Abstract
Ⅰ. 서론
II. 연료전지의 발전원리 및 전기적 모델링
III. 전력변환 회로를 이용한 연료전지 발전시스템 구성
III. 실험결과
1. 벅 컨버터 실험파형
2. 풀 브리지 컨버터의 실험 파형
3. 풀 브리지 인버터 실험파형
4. 효율
V. 결론
References

저자정보

  • 윤용호 Yongho Yoon. 정회원, 광주대학교 전기전자공학부

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.