원문정보
A Study on the Development of Latent Fingerprints of Non-Porous Surface Exposed to Fire Extinguisher Powder
초록
영어
A variety of fingerprinting studies have been conducted on non-porous surfaces found at fire scene. However, there has been no study of non-porous surfaces contaminated with fire extinguisher powder used to fight scene. Therefore, in this study, a total of four types of non-porous surfaces heated at high temperatures over a period of time were contaminated with fire extinguisher powder, followed by CA dyeing, powder suspension, and fluorescent powder methods respectively. Experiments showed that CA dyeing was able to achieve relatively high scores. However, this showed that the evaluation score was generally lower than the patent fingerprint observed naturally by removing the digestive powder covering the surface of the heated sample with a rubber dust blower. Therefore, if non-porous surfaces contaminated with fire extinguisher powder are found at a fire scene, the patent fingerprint should be recorded first by carefully removing the fire extinguisher powder covering the surfaces before applying various fingerprinting techniques.
한국어
화재현장에서 발견되는 탄화물에 대한 지문감식은 다양하게 이루어져 왔으나 화재 진압을 위해 사용되는 소화기 분말에 오염된 검체를 대상으로 한 연구는 없었다. 따라 서 본 연구에서는 일정시간 높은 온도로 가열한 총 4종의 비다공성 검체들을 소화기 분말에 노출시킨 뒤 CA염색과 파우더 서스펜션 그리고 형광분말법을 각각 적용해보았 다. 실험결과 CA염색처리가 상대적으로 높은 점수를 획득할 수 있었지만 이는 가열된 검체 표면에 덮혀 있는 소화기 분말을 고무 블로어로 제거함으로써 자연적으로 관찰 되는 현재지문 상태에서의 평가점수보다 대체적으로 낮음을 보여주었다. 따라서 화재 현장에서 소화분말에 노출된 검체를 발견하게 될 경우 각종 지문현출기법 적용 전 표 면에 남아있는 분말들을 조심스럽게 제거해가면서 현재지문 상태에서의 기록을 우선 적으로 수행해야 할 것이다.
목차
ABSTRACT
1. 서론
1.1 연구배경
1.2 사건 사례
1.3 분말소화기 약제 조성
2. 실험재료 및 방법
2.1 실험재료 및 기기
2.2 실험방법
3. 실험결과 및 고찰
3.1 실험결과
3.2 고찰
참고문헌
