earticle

논문검색

코르크를 활용한 미세먼지 흡착 경화체의 특성 분석에 관한 연구

원문정보

Study on Analysis and Property of Fine dust Adsorption Matrix for using Cork

이상수, 김용구, 최병철

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

Humanity is exposed to polluted air through tertiary industry. Among them, fine dust is not only harmful to humans as a cause of respiratory diseases, but also the need to solve fine dust in South Korea is being emphasized. In response to such a problem, the need to solve fine dust in South Korea is being emphasized. Accordingly, the purpose of this study is to examine the properties of an adsorption matrix using porous granular cork. The experimental plan set the addition ratio of granular cork, which is a porous material, in the range of 0 to 10 (%) and the interval was set at 2.5%. Experimental items measure table flow, density, flexural strength, air content, absorption rate, compressive strength, and fine dust concentration. As a result of the experiment, as the addition ratio of granular cork increased, the absorption rate and air content increased, and table flow, density, flexural strength, compressive strength and fine dust concentration decreased. Therefore, as the addition ratio of granular cork increases, the concentration of fine s, Granular cork, Porous substancesdust decreases, so that harmful substances can be adsorbed. In addition, if the cork contains appropriate moisture in the mixing process, strength is improved, and it is judged that the mixing process can be made easier because the mixing water is not affected during the mixing process.

한국어

인류는 3차 산업을 통해 오염된 대기에 노출되어 있다. 그 중 미세먼지는 호흡기 질환의 원인으로 사람에 게 유해할 뿐만 아니라 국내에서는 미세먼지를 해결하고자 하는 필요성이 강조되고 있다. 이에 따라, 다공성을 갖 는 입상형 코르크를 사용한 흡착 경화체의 특성을 검토하고자 한다. 실험계획은 다공성 물질인 입상형 코르크의 첨가율을 0~10(%)범위로 하고 간격을 2.5%로 두었다. 실험항목은 유동성, 밀도, 휨강도, 공기량, 흡수율, 압축강도 및 미세먼지 농도를 측정한다. 실험결과, 입상형 코르크의 첨가율이 증가할수록 흡수율 및 공기량은 증가하였고 유동성, 밀도, 휨강도, 압축강도 및 미세먼지 농도는 감소하였다. 따라서, 입상형 코르크의 첨가율이 증가할수록 미 세먼지 농도가 감소하기 때문에 유해물질을 흡착시킬 수 있다. 또한, 배합과정에서 코르크의 적정한 수분을 함유 시켜준다면 강도가 향상될 뿐만 아니라 비빔과정에서 배합수가 영향을 받지 않아 비빔과정이 수월해질 수 있다고 판단된다.

목차

요약
Abstract
Ⅰ. 서론
1.1 연구의 개요
1.2 연구의 목적
1.3 코르크의 흡착 메커니즘
Ⅱ. 실험계획 및 방법
2.1 실험계획
2.2 사용재료
2.3 실험방법
Ⅲ. 실험결과 및 분석
3.1 유동성
3.2 공기량
3.3 밀도 및 흡수율
3.4 휨강도 및 압축강도
3.5 미세먼지 농도
Ⅳ. 결론
REFERENCES

저자정보

  • 이상수 Sang-Soo Lee. 한밭대학교 건축공학과 교수
  • 김용구 Young-Gu Kim. 한밭대학교 건축공학과 박사과정
  • 최병철 Byung-cheol Choi. 한밭대학교 건축공학과 석사과정

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.