원문정보
5-bit FLASH A/D Converter Employing Time-interpolation Technique
초록
영어
A time-interpolation technique has been applied to the conventional FLASH analog-to-digital converter (ADC) to increase a number of quantization level, thus it reduces not only a power dissipation, but also minimize an active chip area. In this work, we demonstrated 5-bit ADC which has 31 quantization levels consisting of 16 conventional voltage-mode comparators and 15 time-mode comparators. As a result, we have achieved about 48.4% voltage-mode comparator reductions. The ADC is fabricated in a 14nm fin Field-effect transistor (FinFET) process with an active die area of 0.0024 mm2 while consuming 0.82 mW through a 0.8 V supply. At 400-MS/s conversion rate, the ADC performs 28.03 dB SNDR (4.36 ENOB) at 21MHz input frequency.
한국어
본 연구는 시간-보간법을 적용한 FLASH analog-to-digital converter (ADC)에 관한 것이다. 시간-보간 법은 기존의 FLASH ADC에서 요구되는 전압영역 비교기의 개수를 줄일 수 있으며 이 따른 전력 소모 및 칩 면적 의 절약을 기대할 수 있다. 본 연구에서는 5-bit, 즉 31개의 양자화 레벨을 갖는 ADC를 설계 및 구현하였으며, 16개의 양자화 레벨은 기존의 전압영역 비교기 방식을 유지하고, 나머지 15개의 양자화 레벨은 시간영역 비교기 를 통하여 처리되도록 구성하여, 기존 5-bit FLASH ADC 대비 전압영역 비교기의 숫자를 48.4% 줄일 수 있었다. 시제품은 14 nm Fin Field-effect transistor (FinFET) 공정으로 제작되었으며 구현면적은 0.0024 mm2, 전력 소모는 0.8 V 전원전압에서 0.82 mW로 측정되었으며, 400 MS/s의 변환속도 21 MHz 정현파 입력에 대하여 ADC는 28.03 dB의 신호-대-잡음비 (SNDR), 즉 4.36 유효비트(ENOB)의 성능을 보였다.
목차
Abstract
1. 서론
2. 비교기 회로 분석
3. 비교기 전압-시간 변환 관계
4. 5-bit 양자화기 회로 설계
5. 측정결과
6. 결론
REFERENCES