원문정보
초록
영어
In this study, the performance was checked and the optimal conditions were found by machining the inner surface of a round pipe using the magnetic abrasive finishing method. In this experiment, an AL 6063 pipe was used as a sample. To check the performance of magnetic abrasive finising, the machining effect of different abrasive particle mixing ratio, rotation speed, and magnetic pole arrangement was analyzed through surface roughness (Ra) and weight removal measurement. The optimum mixing ratio was 3:1 of electrolytic iron to magnetic abrasive particles, the rotational speed was 1600rpm, and the best surface roughness was obtained in the N-S-N arrangement of magnetic poles.
목차
ABSTRACT
1. 서론
2. 실험방법
2.1 실험장치
2.2 실험조건
2.3 측정장비
3. 실험 결과
3.1 입자 혼합 비율에 따른 가공 특성
3.2 회전속도(rpm)에 따른 가공 특성
3.3 자극배치에 따른 가공 특성
4. 결론
후기
References
1. 서론
2. 실험방법
2.1 실험장치
2.2 실험조건
2.3 측정장비
3. 실험 결과
3.1 입자 혼합 비율에 따른 가공 특성
3.2 회전속도(rpm)에 따른 가공 특성
3.3 자극배치에 따른 가공 특성
4. 결론
후기
References
키워드
저자정보
참고문헌
자료제공 : 네이버학술정보