원문정보
입도, 교반강도 그리고 표면개질이 EAFRS를 이용한 CSOs의 인 흡착특성에 미치는 영향
초록
영어
First flush having non-point pollutants have been increasing due to the increase in impermeable area by urbanization and industrialization, and there is a real difficulty in river water quality management due to CSOs and first flush. The purpose of this study is to optimize the phosphorus adsorption process using EAFRS as an adsorbent to improve the phosphorus reduction efficiency of CSOs. During the phosphorus adsorption reaction, the optimum conditions for the phosphorus adsorption process were derived by investigating the amount of phosphorus removal according to the slag particle size, surface modification and mixing intensity. According to the study, the smaller the slag particle size, the higher the phosphorus adsorption efficiency, and difference in phosphorus removal efficiency between the surface-modified slag using iron salts and the non-modified slag was not large as to whether surface was modified, But It was judged that iron ions and phosphorus prefer to bond more than that of phosphorus and calcium in surface modified slag. Under the mixing conditions with ceramic balls, the phosphorus removal rate tended to increase significantly, thus mixing method was judged to be a major factor in increasing the phosphorus adsorption efficiency. Lastly, FE-SEM, XRD and FT-IR analysis were performed to investigate the changes in the microstructure and chemical characteristics of the slag before and after phosphorus adsorption.
한국어
도시화와 산업화로 인한 불투수 면적 증가로 비점오염물질이 포함된 초기우수 발생이 증가하고 강우 시 미처리 하수의 유 역하천 유입으로 하천 수질관리에 현실적인 어려움을 겪고 있다. 본 연구에서는 초기우수 및 강우 시 미처리 하수의 인 저감 효율 향상을 위하여 EAFRS를 흡착제로 사용한 인 흡착종정의 최적화를 목적으로 수행되었다. 인 흡착 반응 시 슬래그 입도, 표면개질 여부 그리고 교반강도에 따른 인 제거량 조사를 통해 인 흡착공정의 최적조건을 도출하였다. 실험결과 슬래그 입도 가 작아질수록 인 흡착 효율이 증가하는 것으로 확인되었고 철염을 이용한 슬래그 표면개질 여부는 표면개질 슬래그와 비 개 질 슬래그 사이의 인 제거 효율의 차이는 크지 않았지만 철염을 이용한 개질 약품으로 인한 pH의 영향으로 칼슘과 인의 결 합보다 철이온과 인의 결합이 주도적으로 발생한 것으로 나타났다. 세라믹 볼을 이용한 교반 조건에서 인 흡착 효율은 크게 증가하였고 교반 방식의 여부는 인 흡착 효율 증가에 주요한 요인으로 밝혀졌다. 마지막으로 인 흡착 전후 슬래그의 미세구 조 변화와 화학적 특성을 조사하기 위해 FE-SEM, XRD, FT-IR분석을 수행하였다.
목차
요약문
I. 서론
II. 연구방법
1. 실험 재료
2. 슬래그 표면 개질
3. 등온흡착실험
4. 전기로 환원 슬래그의 인 제거 영향인자
5. 슬래그의 미세구조 및 표면 특성조사
III. 결과 및 고찰
1. 슬래그의 입도가 인 제거에 미치는 영향
2. 슬래그 표면개질이 인 제거에 미치는 영향
3. 교반 방식이 인 제거에 미치는 영향
4. 슬래그의 인 등온흡착실험
5. 인 흡착 반응 전, 후 슬래그의 미세구조 및 특성
IV. 결론
References
