earticle

논문검색

Original Article

스마트팩토리 확산을 위한 비파일시스템(None File System) 기반의 차세대 데이터보호에 관한 연구

원문정보

A Study on Next-Generation Data Protection Based on Non File System for Spreading Smart Factory

김승용, 황인철, 김동식

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

Purpose: The introduction of smart factories that reflect the 4th industrial revolution technologies such as AI, IoT, and VR, has been actively promoted in Korea. However, in order to solve various problems arising from existing file-based operating systems, this research will focus on identifying and verifying non-file system-based data protection technology. Method: The research will measure security storage that cannot be identified or controlled by the operating system. How to activate secure storage based on the input of digital key values. Establish a control unit that provides input and output information based on BIOS activation. Observe non-file-type structure so that mapping behavior using second meta-data can be performed according to the activation of the secure storage. Result: First, the creation of non-file system-based secure storage’s data input/output were found to match the hash function value of the sample data with the hash function value of the normal storage and data. Second, the data protection performance experiments in secure storage were compared to the hash function value of the original file with the hash function value of the secure storage after ransomware activity to verify data protection performance against malicious ransomware. Conclusion: Smart factory technology is a nationally promoted technology that is being introduced to the public and this research implemented and experimented on a new concept of data protection technology to protect crucial data within the information system. In order to protect sensitive data, implementation of non-file-type secure storage technology that is non-dependent on file system is highly recommended. This research has proven the security and safety of such technology and verified its purpose.

한국어

연구목적: 우리나라 최근 4차 산업 혁명의 핵심 기술인 인공지능(AI), 사물인터넷(loT), 가상현실(VR) 등을 제조 환경에 반영한 스마트공장 도입이 활발히 추진되고 있다. 그러나 기존 운영체제 기반의 파일 시스템에서 발생하는 각종 문제점을 해결하고자 비파일시스템 기반의 데이터보호 기술을 연구·검증하 고자 한다. 연구방법: 본 연구에서는 운영체제에 의해 식별되거나 제어되지 않는 보안저장부와 디지털 키 값의 입력에 따라 보안 저장부를 활성화할 수 있는 방법연구와 BIOS 동작 시 연결을 위한 입출력 정보만 제공하는 제어부를 설정하고 보안 저장부의 활성화에 따라 제2 메타 데이터를 사용한 맵핑 동작을 수행할 수 있도록 비파일형태의 구 조를 연구함. 연구결과: 첫째, 비파일시스템 기반의 보안 저장부의 생성과 데이터 입출력 시 데이터 손상 여부를 샘플 데이터의 해시함수 값 과 일반 저장부 및 보안 저장부의 해시함수 값을 비교하여 일치하는 것을 확인하였음. 둘째, 보안 저장부의 데이터 보호 성능 실험에서는 원 본 파일의 해시함수 값과 랜섬웨어 활동 이후의 일반 저장부와 보안 저장부의 해시함수 값을 비교하여 악성코드인 랜섬웨어로부터 데이터 보호 성능을 확인함. 결론: 본 연구는 국가적으로 추진하고 있는 스마트팩토리 구축 사업을 통해 기업에 도입되고 있는 정보시스템 내의 중 요 데이터를 보호하기 위한 새로운 개념의 데이터 보호 기술을 구현하고 실험하였다. 정보보안의 목적인 중요 데이터의 보호를 위해 기존의 저장 개념과 달리 파일 시스템에 비의존적인 비파일 형태의 보안 저장부 생성기술을 구현하였고 그 안전성을 검증하였음.

목차

ABSTRACT
요약
서론
데이터 저장방식
실험설계
실험결과
결론
Acknowledgement
References

저자정보

  • 김승용 Seungyong Kim. Professor, Department of Management Information System, Korea National University of Transportation, Chungju, Republic of Korea
  • 황인철 Incheol Hwang. Director, Secuware Inc., Cheongju, Republic of Korea
  • 김동식 Dongsik Kim. Director, KCC Corporation, Seoul, Republic of Korea

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.