earticle

논문검색

디바이스와 모듈

한 쌍의 L-형 모노폴 슬롯 공진기를 이용한 X-밴드 트랜지스터 발진기 설계

원문정보

Design of transistor oscillator for X-band application using a pair of L-shaped monopole slot resonator

이영민, 이영순

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

In this paper, a planar transistor oscillator for X-band using a newly proposed L-shaped monopole slot resonator is proposed. For planar design, an L-shaped monopole slot with an open-end is used as a resonator for a transistor oscillator. As a result of the simulated design of the resonator in three stages, a high Q value of 1169.84 and a high insertion loss of 49.934 dB were identified. The results of the final design and manufactured oscillator measurements confirmed that the oscillation output is greater than 7 dBm and has good phase noise characteristics of –58 dBc/Hz at 100 kHz offset. The proposed oscillator is planar and has the advantage of being directly applicable to microwave integrated circuit technology. It also has the advantage of being able to reduce its size as it can only be implemented in microstrip form without additional devices such as metal cavities and tuning screws in 3D structures, as in the case of a DRO (dielectric resonance oscillator).

한국어

본 논문에서는 새롭게 제안되는 L-형 모노폴 슬롯 공진기를 이용한 X-band용 평면형 트랜지스터 발진기를 제안 하였다. 평면형 설계를 위해 끝이 개방된 L자형 모노폴 슬롯을 트랜지스터 발진기의 공진기로 사용하였다. 3단계를 통한 공진기의 모의 실험 설계 결과 1169.84의 높은 Q 값과 49.934 dB의 높은 삽입 손실을 확인하였다. 최종 설계 및 제작 된 발진기의 측정결과 7 dBm 이상의 발진 출력과 100 kHz 오프셋에서 - 58 dBc/Hz의 양호한 위상 잡음 특성을 가지 는 것을 확인하였다. 제안된 발진기는 평면형으로 마이크로파 집적회로 기술에 직접 적용할 수 있다는 장점을 가지고 있다. 또한 DRO(유전체 공진 발진기)의 경우처럼 3D 구조의 금속 공동, 튜닝 스크류 등 추가 기기 없이 마이크로스트립 형태로만 구현할 수 있어 크기를 줄일 수 있다는 장점도 있다.

목차

요약
Abstract
Ⅰ. 서론
Ⅱ. 공진기 설계
1. 모노폴 슬롯 이론
2. Quality factor의 정의
3. 평면형 공진기 설계
Ⅲ. 발진기 설계
1. 궤환 회로 설계
2. 바이어스 회로 및 매칭 회로 설계
Ⅳ. 측정 결과 분석
Ⅴ. 결론
References

저자정보

  • 이영민 Yeong-min Lee. 정회원, 금오공과대학교 전자공학과
  • 이영순 Young-soon Lee. 정회원, 금오공과대학교 전자공학부 교수

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.