earticle

논문검색

<학술연구>

자동차 프론트 윙의 형상에 따른 운행시 유동해석

원문정보

Flow Analysis at Driving Due to Configuration of Automotive Front Wing

최계광, 조재웅

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

In this study, the flow analyses were carried out on three kinds of front wing models. The down forces of front wings which influence the stability, cornering at driving were investigated with three models. At model 1, the maximum pressure shown on the main plate of front wing is 3177.539Pa. The maximum pressures at models 2 and 3 are shown to be 3429.677Pa and 3506.494Pa, respectively. The higher the pressure, the more resistance. So, the lower the pressure, the less resistance the model gets. At model 1, the maximum velocity of stream that flows under the front wing was shown to be the smallest among three models. In case of all three models, the pressure at which the air passes through the front wing is high in the upper part of the front wing. Among three models, model 1 is thought to be the most appropriate model to give the effect of the down force while reducing the flow resistance at driving. By utilizing this study result, the flow velocity and pressure are investigated without the flow experiment at driving due to the configuration of automotive front wing, and the flow resistance can be seen.

목차

ABSTRACT
1. 서론
2. 연구 결과
2.1 모델링 및 경계 조건
2.2 유동 해석 결과
3. 결론
References

저자정보

  • 최계광 Kye-Kwang Choi. Department of Metalmold Desing Engineering, Kongju National University
  • 조재웅 Jae-Ung Cho. Member, Professor, Division of Mechanical & Automotive Engineering, Kongju National University

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.