earticle

논문검색

경비행기 프로펠러의 공기 유동해석에 관한 융합 연구

원문정보

A Convergent Investigation on the Air Flow Analysis of a Light Aircraft Propeller

최계광, 조재웅

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

In this study, the models with three, five and ten wings of the propeller which made a light aircraft fly were performed by air flow analyses. As for the flow model A with the shape with five wings, Model A can be seen to be the most ideal flow of air. The flow of air through the number of wings, which is not too many or too few, shows the most smooth flowing form. The smaller the number of propeller blades, the smaller the flow of air. Model A is applied under pressure of up to 0.5631 MPa at the front of air flow. Also, models B and C are applied under pressures of 0.5758 MPa and 0.5589 MPa, respectively. Comparing the pressure contours for each model of flux, model B can be shown to have the highest pressure distribution. The result of this study can be used to investigate the air flow without actual testing. It also seems to be helpful in the aesthetic convergent design of light aircraft propeller.

한국어

본 연구에서는 경비행기를 날게 하는 프로펠러인 3개 및 5개 또는 10개가 있는 날개의 모델들로서 공기 유동 해석을 하였다. Model A에 대해서는 5개의 날개들이 있는 유동 형상으로서 Model A가 가장 이상적인 공기의 흐름을 보이고 있다. 너무 많거나 적지도 않은 날개 수로 공기의 흐름이 가장 원활히 흐르는 형상을 나타내고 있다. 프로펠러 날개의 수가 적으면 적을수록 공기의 유동이 작아지는 것을 볼 수 있다. Model A는 공기 유동의 전면부에서 최대 0.5631 MPa의 압력을 받고 있다. 또한 Model B와 Model C는 0.5758 MPa 및 0.5589 MPa의 압력을 각각 받고 있다. 각 유동 모델들에 대한 압력 등고선들을 비교해 보면, Model B가 그 압력 분포가 제일 높은 것으로 볼 수 있다. 본 연구 결과를 활용하면 실제 시험을 하지 않고서도 공기 유동을 조사할 수 있다. 또한 경비행기 프로펠러의 미적인 융합 설계에 도움이 될 수 있다고 보인다.

목차

요약
Abstract
1. 서론
2. 유동 모델링 및 경계 조건들
3. 유동 해석결과
4. 결론
REFERENCES

저자정보

  • 최계광 Kye-Kwang Choi. 공주대학교 금형설계공학과 교수
  • 조재웅 Jae-Ung Cho. 공주대학교 기계자동차공학부 교수

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.
      ※ 학술발표대회집, 워크숍 자료집 중 4페이지 이내 논문은 '요약'만 제공되는 경우가 있으니, 구매 전에 간행물명, 페이지 수 확인 부탁 드립니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.