earticle

논문검색

기술 융합(TC)

EP가 적용된 마찰 진자형 지진격리받침의 피로거동분석

원문정보

Evaluation on Fatigue Behavior of EP(Engineering Plastic) Friction Pendulum Bearing System

최정열, 박희수, 정지승

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

As the risk of earthquakes increases recently, earthquake-resistant designs were getting interest. For this reason, this study applies that Friction pendulum-type seismic isolator is a device that attenuates seismic energy by friction and pendulum motion. The friction pendulum-type seismic isolator of this study is very easy to transport, install and maintain with light weight of metal by applying the slider using high strength engineering plastic. In addition, there is an advantage that the corrosion resistance is very excellent compared to the existing metal parts. However, there is concern about long-term durability by replacing metal materials. In this study, the frictional pendulum-type seismic isolator with EP was applied to compressive-shear test, repeated fatigue test, and ultimate load test after fatigue test, and analyzed the deformation and shear or properties after the test. As the results, the adequacy of long term fatigue durability was experimentally proven.

한국어

최근 지진에 대한 위험이 고취됨에 따라 내진설계에 대한 관심이 높아지고 있는 실정이다. 이에 본 연구에서는 면진장치중 하나인 마찰 진자형 지진격리받침을 고강도 엔지니어링 플라스틱을 이용하여 슬라이더(spherical)를 적용 하였다. 이는 다른 금속에 비해 가벼운 중량으로 운반, 설치 및 유지보수가 매우 용이하고, 기존의 금속부품 대비 내 부식성이 매우 우수하다. 또한 특수 마찰재를 삽입하여 사용하므로 교체가 용이하여 마찰계수 조절이 가능하다는 장 점을 입증하였지만 금속 소재 슬라이더 대비 장기 처짐에 대한 우려가 대두되어 왔다. 따라서 본 연구에서는 개발된 마찰 진자형 지진격리받침으로 압축-전단시험, 반복피로시험 후 극한하중 재하시험을 실시하여 시험 후의 압축 및 전 단특성 변화와 반복피로시험 후 극한하중 재하시 슬라이더의 변형 및 전단특성을 측정, 분석하여 슬라이더의 장기 처 짐값을 측정하였고 그 처짐값이 사용 설계 허용범위 내에 있는지를 입증하였다.

목차

요약
Abstract
Ⅰ. 서론
Ⅱ. 마찰 진자형 지진격리받침 구성
Ⅲ. 실내시험
Ⅳ. 시험 결과
Ⅴ. 결론
References

저자정보

  • 최정열 Jung-Youl Choi. 정회원, 동양대학교 건설공학과 교수
  • 박희수 Hee-Soo Park. 정회원, ㈜자돌 대표이사
  • 정지승 Jee-Seung Chung. 정회원, 동양대학교 건설공학과 교수

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.