earticle

논문검색

<학술연구>

SiO2 나노유체에서 관의 형상에 따른 열전달 특성에 관한 수치해석 연구

원문정보

Numerical Study on Heat Transfer Characteristics of Tube Type using SiO2 Nanofluids

전유선, 남현택, 김종현, 이승로

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

In this paper, the heat transfer performance of nanofluids is predicted by numerical analysis methods. The nanoparticles used in this study is SiO2, with concentrations of 1, 2, 3vol.%, and the base fluid is water. Reynolds number of nanofluids ranges from 10,000 to 50,000. A numerical study on the heat transfer characteristics of nanofluid was conducted using a single-phase model. The temperature of the fluid entering from the inlet of the tube is 293.15K. A constant heat flux of 31,650W/m2 was applied at the wall, and the thickness of the wall was ignored. Heat transfer coefficients, thermal conductivity and Nusselt number were selected as indicators for comparing heat transfer performance of nanofluids. As the nanofluid concentration increases, the temperature and velocity distribution by the cross section of the coil tube and straight tube increased. As the Reynolds number increases, temperature difference between inner direction and outer direction reduced in coil tube. For straight tube, the temperature difference between the wall and the center of the tube also decreased.

목차

ABSTRACT
1. 서론
2. 수치해석 방법
2.1 열적 물성 계산
2.2 수치해석 방법
2.3 Grid Independence Test
2.4 데이터 처리
3. 수치해석 결과
3.1 나노유체의 농도에 따른 영향
3.2 나노유체의 Re 수에 따른 영향
3.3 코일관과 직관의 열전달 성능 비교
4. 결론
References

저자정보

  • 전유선 Yuseon Jeon. Jeonbuk National University, Dept. of Mechanical Eng
  • 남현택 Hyeon-Taek Nam. Jeonbuk National University, Dept. of Mechanical Eng
  • 김종현 Jong-Hyun Kim. Korea Lift College
  • 이승로 Seungro Lee. Jeonbuk National University, Dept. of Mechanical Eng

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.