원문정보
Fundamental Properties of Controlled Low Strength Materials Mixed Fly Ash
초록
영어
This study In this study, an experiment was conducted to propose the basic assessment data for the expanded application, commercialization, and field application of Controlled Low Strength Materials (hereinafter, CLSM) in Korea through the assessment of the basic physical properties of CLSM by utilizing FA, and the following conclusions were arrived at. First, it was confirmed that the unit quantity increases by approximately 0.96 fold with each increase in the unit cement quantity by 10(kg/m3). Second, regarding the results of the flow test, the field application standard of more than 200mm was satisfied. However, it was confirmed that there is a need for improvement of liquidity through appropriate mixing of AE agent. Third, bleeding was less than 3%, thereby satisfying the field application standards. Moreover, in the event of setting f/a at 30%, it was confirmed that a mixing of about 0.1 (%, kg/m3) of the AE agent is effective in bleeding control. Fourth, there was a manifestation of a strength increase rate of approximately 98% on the basis of the 28 days of material age in accordance with the increase in the unit cement quantity of 10(kg/m3). Moreover, regarding refilling and effective strength motion in the surroundings of the structure, C20 and C30 were confirmed to be most appropriate. Fifth, regarding the results of the SEM imaging, it was confirmed that there is no clear relevance with the surface apertures and internal, minute apertures that occurred in the test specimen of CLSM.
한국어
본 연구에서는 FA를 주 사용재료로 활용한 CLSM의 기초적 물성을 파악하여 현장적용을 위한 기초적 자료로 제안하고 나아가 CLSM의 확대적용 및 실용화를 위한 자료로 활용하고자 실험을 통해 다음과 같은 결론을 얻었다. 첫째, 단위시멘트량이 10(kg/m3)씩 증가함에 따라 단위수량은 약 0.96배 정도 증가하는 것으로 확인되었다. 둘째, 플로우시험결과 현장적용 기준치인 200mm 이상을 만족하였으나, AE제의 적정 혼입을 통한 유동성 개선이 필요한 것으로 확인되었다. 셋째, 블리딩은 3% 이하로 현장적용 기준을 만족하였고 또한, f/a를 30%로 설정하는 경우 AE제를 0.1(%, kg/m3) 정도 혼입하면 블리딩 제어에 유효한 것으로 확인되었다. 넷째, 단위시멘트량 10(kg/m3) 증가에 따라 재령 28일 기준 약 98% 강도증가비율이 나타났고 또한, 구조물 주변의 되메움 및 유효 강도거동에 있어서는 C20 및 C30이 가장 적합한 것으로 확인되었다. 다섯째, SEM 촬영결과에서는 잔골재 주변으로 FA가 밀실하게 분포되어 미세공극이 거의 없는 것으로 파악되었다.
목차
1. 서론
1.1 연구배경 및 목적
1.2 연구범위 및 방법
2. 실험계획
2.1 실험재료
2.2 배합 및 공시체, 양생
2.3 시험항목
3. 실험결과 및 분석
3.1 유동성
3.2 블리딩
3.3 압축강도
3.4 SEM 촬영결과
4. 결론
REFERENCES