earticle

논문검색

자동차에서의 공기의 유입구에 따른 유동해석에 관한 융합 고찰

원문정보

Convergent Investigation on Flow Analysis According to the Inlet Port of Air at Car

오범석, 조재웅

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

In this study, the flow analysis of air in the inner side of vehicle due to the position on inlet port of air at car was carried out. Under the comfortable condition as the inlet port in which the air flows, it was possible to confirm that the inlets became the upper and middle sides or the forward side of the vehicle. If the air flow is not evenly distributed within the vehicle, the lower position of the vehicle is the lowest condition among all conditions. The results of this study will help to keep the inner state of the vehicle pleasant by adjusting the location of the inlet to suit the passenger's taste or situation. The design and analysis results of this study can be effectively applied at adjusting the location of the inlet at car. By applying the flow analysis according to the inlet port of air at car, this paper is seen as the convergence study that conforms to aesthetic design.

한국어

본 연구에서는 자동차에서의 공기의 유입구에 따른 자동차 내부에서의 유동 해석을 하였다. 공기가 들어오는 유입구로서 쾌적성이 좋은 조건으로서는 유입구가 자동차의 상단 중간이나 전방위치임을 확인할 수 있었다. 차량 내부 에 공기 유동의 고르게 분포가 안되는 경우는 자동차의 하단 위치가 유입구의 모든 조건들 중에서 가장 저조한 조건하 다. 본 연구 결과를 통하여 탑승자의 기호나 상황에 맞게 공기의 유입이 되도록 그 유입구의 위치를 조절하므로서 자동 차 내부의 상태를 쾌적하게 유지할 수 있는데 도움이 될 것이다. 본 연구의 설계 및 해석 결과는 실제적으로 자동차에서 의 공기의 유입구의 위치를 조절하는 데에 효율적으로 적용할 수 있다. 자동차에서의 공기의 유입구에 따른 유동해석을 적용함으로서, 본 논문이 미적인 설계에 부합된 융합 연구라고 보여진다.

목차

요약
Abstract
1. 서론
1.1 연구배경
1.2 연구방법
2. 본론
2.1 3D 모델링들 및 유동해석 조건들
2.2 유동해석 결과들
3. 결론
REFERENCES

저자정보

  • 오범석 Bum-Suk Oh. 공주대학교 기계자동차공학부 교수
  • 조재웅 Jae-Ung Cho. 공주대학교 기계자동차공학부 교수

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.