earticle

논문검색

<학술연구>

차량용 공조시스템을 위한 Vortex Tube의 적용가능성 연구

원문정보

A Study on the Applicability of Vortex Tubefor Vehicle Air Conditioning System

서원준, 정인호, 임석연

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

Vortex tube is a simple structure and environmentally friendly method of temperature separation. In this paper, the applicability of the vehicle air conditioning system using the Vortex tube was reviewed. Experimental conditions, the pressure was set at 0.5~5.0kgf/cm2, and the cold air flow ratio (yc) was set at 0.1~0.9. Experiment result, the high temperature section represents the highest temperature value at yc=0.8. The cold zone represents the lowest temperature value at yc=0.5. In case of indirect heat exchanger experiment result, the maximum temperature difference was 11°C in the cold zone and 15°C in the hot zone. In case of direct heat exchange, the low temperature area was 11°C and the high temperature area was 11°C. According to the experiment result, although indirect heat exchange method performs better than direct heat exchange method, the time to reach normal temperature is four times slower than direct heat exchange method. Therefore, in order to apply to a vehicle air conditioning system, it is judged that it is effective to use a direct heat exchange method having a fast reaction speed and a low flow rate resistance.

목차

ABSTRACT
기호설명
1. 서론
2. 실험 장치 및 방법
2.1 Vortex tube의 성능 특성에 따른 기초 실험
2.2 Air conditioner system 적용 검토
3. 실험결과 및 고찰
3.1 공급압력과 Generator의 노즐 개수 변화
3.2 간접 열교환 방식
3.3 직접 적용 방식
4. 결론
후기
References

저자정보

  • 서원준 Won-Jun Seo. Member, Department of Automotive Engineering Tongmyong University
  • 정인호 In-Ho Jeong. Member, Department of Automotive Engineering Tongmyong University
  • 임석연 Seok-Yeon Im. Member, Department of Automotive Engineering Tongmyong University

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.