earticle

논문검색

<학술연구>

탄소섬유 Z-핀의 제작공정에 따른 인발특성

원문정보

Pull-out Characteristics of Carbon Fiber Z-pin Depending on the Manufacturing Process

심충기, 정성균

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

In this study, carbon fiber Z-pins were fabricated by applying the different manufacturing process, and pull out test was performed for the dumbbell type of test specimens. Carbon fiber Z pins with smooth surface(type I) and stepped surface(type II, type III) were fabricated by using autoclave. Carbon fiber Z-pins with stepped surface were manufacturing method, that is, mold forming and machining process. The experimantal results show that carbon fiber Z pins have superior pull-out characteristics to carbon steel Z-pins. Pull-out load and pull-out toughness of carbon fiber Z pins with stepped surface are larger than those of carbon fiber Z-pins with smooth surface. Pull-out load and pull out toughness of mold f ormed Z-pin are 31% and 218% larger than those of smooth surfaced Z-pins, respectively.

목차

ABSTRACT
1. 서론
2. 실험
2.1 Z-핀
2.2 인발시험편
2.3 인발시험
3. 결과 및 토론
4. 결론
후기
References

저자정보

  • 심충기 Chung-Ki Sim. Dept. of Energy System Engineering, Graduate School of Energy and Environment, Seoul National University of Science and Technology
  • 정성균 Seong-Kyun Cheong. Member, Dept. of Mechanical and Automotive Engineering, Seoul National University of Science and Technology

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.