패널 이송용 정렬장치의 구조 및 진동해석


Structure and Vibration Analysis of Align Unit for Panel Transfer

박영규, 왕쩐후안, 권영철

피인용수 : 0(자료제공 : 네이버학술정보)



In this study, the structural stability of an align unit was studied to investigate the deformation and vibration characteristics of the upper and lower modules of the align unit during LCD panel transfer. The align unit consists of upper module and lower module. SolidWorks Simulation was used to analyze the structure, fatigue, and modes, to understand the deformation and vibration of the stiffness of the align unit. Because of the upper eccentric structure of the align unit, the main strain was large at the contact of the upper and lower modules and at the bottom of the support, and more pronounced at it’s front. The stress was large in the front support of the upper and lower modules, and the displacement was observed in the front of the upper module. The minimum life cycle that indicates the structural integrity of the align unit has exceeded its usable number. Also, the increase in natural frequency of the align unit gradually slowed down, as the vibration mode increased.


1. 서론
2. 해석모델 및 해석조건
2.1 해석모델
2.2 해석조건
3. 해석결과
3.1 구조해석
3.2 피로해석
3.3 고유 진동수 해석
4. 결론


  • 박영규 Young-Gyu Park. Department of Mechanical Engineering, Sunmoon University
  • 왕쩐후안 Zhen Huan Wang. Department of Mechanical Engineering, Sunmoon University
  • 권영철 Young-Chul Kwon. Department of Mechanical Engineering / Research Institute for Industrial Technology, Sunmoon University


자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.