earticle

논문검색

기술 융합(TC)

중장비 상태 감시를 위한 디스플레이 시스템 구현에 대한 연구

원문정보

A Study on Realization of Display System for Monitoring of Heavy Equipment State

김기환

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

In this study, the characteristics and operation of a multi-purpose loader equipped with various sensors such as a sensor capable of measuring the boom length, an angle sensor capable of measuring the tilt of the left and right sides of the boom and the loader, and a load cell capable of measuring the weight during lifting We have implemented a system that displays related data values. The configuration of the system reads the values from the sensors, sends them to the vehicle controller, and transmits the calculated results of the overturn rate and other important information to the display device using the CANOpen protocol. Also, in the calculation of the overturn ratio, the structure of the multi-purpose loader is similar to that of the crane belonging to the heavy equipment, and the crane overturn rate calculation method is used. Through this study, we can observe the condition of the heavy equipment and recognize the emergency situations such as abalone through the display device.

한국어

본 연구에서는 붐 길이를 측정할 수 있는 센서, 붐 및 로더의 좌우측의 경사를 측정할 수 있는 각도센서 그 리고 리프팅 시 무게를 측정할 수 있는 로드셀 등의 여러 센서를 장착한 다목적 로더의 특성과 운행에 관련된 데이 터 값을 디스플레이하는 시스템을 구현하였다. 시스템의 구성은 다음 각종 센서로부터 값을 읽어와 이를 차량제어기 에 보내고 제어기에서 계산한 전복률 결과와 기타 중요한 정보를 디스플레이 장치에 CANOpen 프로토콜을 이용하여 전달하게 하였다. 또한 전복률 계산에 있어서는 다목적 로더의 구조가 중장비에 속하는 크레인의 구조와 비슷하여 크 레인 전복률 계산방식을 사용하였으며 좌우 경사도에 따른 전복 위험성은 실험을 통하여 전복가능성이 있는 좌우 경 사각을 추출하였다. 본 연구를 통하여 중장비 차량의 상태를 관찰하며 전복 등의 비상 상황을 디스플레이 장치를 통 해 사전 인지할 수 있게 하였다.

목차

요약
Abstract
Ⅰ. 서론
Ⅱ. 시스템구성
1. 모니터링 시스템의 전반적인 구성 개요
2. 원격 진단 시스템의 고장 분류
3. CANOpen 프로토콜
4. 전복률계산 및 전복 가능성 경고 장치
Ⅲ. 구현 및 결과
Ⅳ. 결론
References

저자정보

  • 김기환 Kee Hwan Kim. 정회원, 세명대학교 전자공학과 교수

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.