earticle

논문검색

지속가능한 소재를 이용한 3D 프린팅 패션 제품 개발연구

원문정보

Presentation Methods for Transformable Fashion Design

감선주, 유영선

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

This study investigates the temporal dimensions and formative concepts connoted in transformable fashion design by examining the various devices and approaches of transformable fashion design presentation. In the case analysis, this study focuses on the fashion shows and fashion exhibitions that are traditional presentation methods as well as the images and videos on social media of which the importance is increasing. The cases have been collected through literature reviews and the Internet search since 2010 to the present. The results of analysis of fashion presentation method of transformable fashion design in fashion shows, fashion exhibitions, fashion photographs and films are as follows: First, in fashion shows, transformations were realized mainly through the help of the wearer, a third party, or a device, and in some cases, two or more models appeared to reveal each transformability. Next, in fashion exhibitions, transformability was demonstrated through various forms of display, auxiliary media and mechanical devices rather than the intervention of the wearer or a third party. Lastly, the presentation through photographs conveyed the transformability with the images of two or more outfits simultaneously, yet in the presentation through films, the movement of the model was minimized to emphasize transformation process of the garment or to explain the driving system or process. Mostly, fashion photographs and films are used in parallel with a fashion show or a fashion exhibition rather than utilized independently.

한국어

미래 차세대 기술로 부각되고 있는 3D 프린팅 기술은 지속가능성의 환경적, 경제적, 사회적 요인들을 포함 하고 있으나 3D 프린팅에 사용되는 프린팅 소재는 지속가능성의 맥락에서 한계가 있다. 이에 본 연구는 3D 프린팅의 지속가능한 소재를 탐구하여 지속가능한 3D 프린팅 패션 제품을 개발하고자 하였다. 문헌 연구를 통하여 현재 3D 프린팅 기술의 지속가능성을 파악하고 지속가능한 프린팅 소재의 사례를 고찰하였다. 현재 3D 프린팅 패션 제품 선행연구와 사례를 토대로 외형, 조직구조, 텍스처로 나누어 분석하고 패션 전문가들의 심층 면접을 통하여 지속가능한 3D 프린팅 패션 제품의 개발 방향을 찾고자 하였다. 연구 결과는 다음과 같다. 3D 프린팅의 지속가능한 소재는 재료의 구성에 따라 하이브리드형 필라멘트와 재활용 필라멘트로 나 눌 수 있다. 3D 프린팅 패션 제품의 외형은 구체적 액세서리형, 추상적 비정형, 구체적 표현 의복형으로 분류 하였고 조직구조는 단일형, 완전형, 유닛 연결형, 부분적 차용을 통한 혼성적 형태로 분류하였다. 또한 텍스 처는 짜임, 타공, 음각, 적층으로 구분하였다. 패션 전문가 심층 면접에서는 3D 프린팅 패션 제품의 구체적 액세서리형이 선호도가 좋았고 조직구조와 텍스처에 따른 선호도는 뚜렷이 구분되지 않았다. 제시된 3D 프 린팅 필라멘트의 사례 중에서는 폐목분 필라멘트가 선호도가 가장 좋았다. 이러한 이론적 연구와 질적 연구 를 토대로 지속가능 소재를 이용하여 3D 프린팅 패션 제품을 개발하였다. 본 연구는 3D 프린팅 기술의 지속 가능성 발전 방향에 저해가 되는 플라스틱 중심의 소재 사용에서 벗어나 지속가능한 3D 프린팅 재료를 탐구 하고 이를 패션 제품 개발에 적용하였다는 점에서 의의가 있다. 본 연구를 통하여 지속가능한 3D 프린팅 패션 제품의 발전 방향에 도움이 될 것으로 기대한다.

목차

요약
Ⅰ. 서론
Ⅱ. 지속가능성과 3D 프린팅
1. 지속가능한 디자인
2. 3D 프린팅의 지속가능성
3. 지속가능한 3D 프린팅 소재
4. 3D 프린팅 패션 제품 디자인
Ⅲ. 3D 프린팅 패션 제품 개발을 위한 질적 연구
1. 연구 방법
2. 심층 면접의 종합적 결과
Ⅳ. 패션 제품 개발
1. 디자인 의도 및 과정
2. 제품 개발
Ⅴ. 결론
References
Abstract

저자정보

  • 감선주 Kam, Seon Ju. 경희대학교 의상학과 겸임교수
  • 유영선 Yoo, Young Sun. 경희대학교 의상학과 교수

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 5,200원

      0개의 논문이 장바구니에 담겼습니다.