earticle

논문검색

<학술연구>

냉동유닛을 적용한 탑차 내부의 온도 및 유동 균일성에 대한 연구

원문정보

Study on Temperature and Flow Uniformity of inside Truck with Refrigeration Unit

최연성, 왕쩐후안, 권영철

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

In this study, the distribution of internal temperature and flow by forced blowing of the refrigeration unit installed in a truck were investigated. The temperature stability inside the box was measured from the experiment using the standard calorimeter and the constant temperature and humidity chamber. Using the computerized analysis method, the uniformity of temperature and flow inside the box was verified in the longitudinal direction(central section) and unidirectional direction(lateral sections of ⅓ and ⅔ points) of the box. The set temperature inside the box was -20℃, and the air flow rate of the refrigeration unit were 70, 80 and 90㎥/min. In the temperature stability experiment, the temperature deviation inside the box was within ±1℃ of the set value. The faster the air flow rate of the refrigeration unit, the lower the temperature and flow uniformity. The temperature and flow uniformity inside the box were most effective at 70㎥/min. Because the temperature and flow deviation were the smallest in the longitudinal direction and the upper and lower section.

목차

Abstract
1. 서론
2. 실험 및 해석 방법
3. 실험 결과 및 고찰
3.1 박스 내부의 온도 안정성 실험
3.2 박스 내부의 온도 균일성 해석
3.3 박스 내부의 유동 균일성 해석
4. 결론
References

저자정보

  • 최연성 Youn-Sung Choi. Department of Mechanical Engineering, Sunmoon University, Graduated student
  • 왕쩐후안 Zhen Huan Wang. Department of Mechanical Engineering, Sunmoon University, Graduated student
  • 권영철 Young-Chul Kwon. Mmber, Department of Mechanical Engineering, Research Institute for Industrial Technology, Sunmoon University, Professor

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.