earticle

논문검색

수평원형관내 나노유체의 혼합대류에 관한 수치적 연구

원문정보

Numerical Study of Mixed Convection Nanofluid in Horizontal Tube

최훈기, 임윤승

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

Laminar mixed convection of a nanofluid consists of water and Al2O3 in a horizontal circular tube has been studied numerically. Two-phase mixture model has been used to investigate hydrodynamic and thermal behaviors of the nanofluid with variables physical properties. Three dimensional Navier-Stokes, energy and volume fraction equations have been discretized using the finite volume method. The Brownian motions of nanoparticles have been considered to determine the thermal conductivity and dynamic viscosity of Al2O3-Water nanofluid, which depend on temperature. The calculated results show good agreement with the previous numerical data. Results show that in a given Reynolds number (Re), increasing solid nanoparticles volume fraction and Richardson number (Ri) increases the convective heat transfer coefficient and wall shear stress.

한국어

수평원형관에서 나노입자인 산화알미늄과 기본유체인 물의 혼합인 나노유체에 대한 층류 혼합대류열전달현상을 유한체적법의 수치적 방법으로 규명하였다. 나노유체에 대하여 2상 혼합모델을 적용하였으며, 나노입자의 물성은 온도와 체적농도의 함수를 사용하였다. 수치해석에 적용한 모든 모델의 타당성 검증을 위하여 Kim등의 실험결과와 비교하였으며 좋은 결과를 얻었다. 벽면을 일정한 열유속으로 가열하므로 나노유체는 벽면부근에서 형성된 부력에 의하여 2차유동이 생성된다. Richardson수와 나노입자의 농도가 증가할수록 강한 2차유동이 형성되어 열전달을 향상시키게 된다. 또한 Richardson수와 나노입자의 농도가 증가하면 대류열전달계수와 전단응력도 증가한다. 이런 연구들은 열교환기의 성능향 상을 위하여 나노유체를 적용하는데 기본자료로 활용이 가능하다. 이번 연구를 기반으로 향후 2중관형열교환기등 다양한 열교환기에 적용할 예정이다.

목차

요약
Abstract
1. 서론
1.1 서론
2. 수치해석 방법
2.1 형상정보 및 지배방정식
2.2 나노유체의 물성치
2.3 경계조건
2.4 무차원 변수 및 성능 분석식
2.5 수치해석 검증
3. 결과 및 고찰
3.1 2차유동분포의 발달과정
3.2 온도의 발달과정
3.3 대류열전달계수
3.4 벽면전단응력에 대한 결과
4. 결론
REFERENCES

저자정보

  • 최훈기 Hoon-Ki Choi. 창원대학교 기계공학부 교수
  • 임윤승 Yun-Seung Lim. 창원대학교 기계공학부 대학원생

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.