earticle

논문검색

<생산기술>

승용차용 알루미늄 IMS의 응력 분포 특성

원문정보

Stress Distribution Characteristics of Al-IMS for Passenger Vehicle

민세훈, 김홍근, 서현규

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

The objective of this numerical study is to investigate the effect of aluminium material on the weight reduction in tubular shaft yoke and solid shaft yoke. The tubular shaft and the solid shaft were designed by 6 stage processes and the results were analyzed by using a finite element analysis method. The coefficient of friction was set to Oil_cold as referred to the analysis library. It was found that the weight was reduced as 65% with applying the aluminium alloy due to lower density than carbon steel. Von-mises stress values of applying aluminium alloy to the tubular shaft yoke and solid shaft yoke were lower than those of carbon steel because of the low yield stress of aluminium alloy. The folding and underfill phenomenon were not observed on the aluminium alloy in tubular shaft yoke and solid shaft yoke. From these results, the weight reduction of products and the extend life of dies can be expected when aluminium alloy is applied.

목차

ABSTRACT
1. 서론
2. 수치 해석적 연구 방법
2.1 각 제품의 형상
2.2 공정 해석
3. 결과 및 고찰
3.1 무게(Weight) 특성
3.2 등가 응력(Von-mises stress) 특성
3.3 금속 유동선(Metal flow line) 특성
3.4 결육(Under-fill) 특성
4. 결론
후기 
References

저자정보

  • 민세훈 Se Hun Min. Graduate school of Mechanical Engineering, Kongju National University
  • 김홍근 Hong Guen Kim. Graduate school of Venture, Hoseo University
  • 서현규 Hyun Kyu Suh. Member, Division of Mechanical & Automotive Engineering, Kongju National University

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.