earticle

논문검색

스마트 팩토리를 위한 IoT 디바이스 기반의 데이터 수집과 비 면허 주파수 대역의 무선 네트워크

원문정보

Smart Factory data collection using IoT device and Non-licensed frequency band wireless network

유승재, 권구인

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

Smart Factory should be able to collect factory data with low installation and operating costs, and long distance communication should be possible to send and receive those collected data. However, the existing Smart Factory data collection method requires not only expensive equipment but also has low compatibility between devices. This makes it difficult for smart factories to introduce new equipment and replace old one. Continuously wired network, which is mainly used as a method for establishing long distance communication, is expensive and difficult to install and manage. Moreover, existing wireless communication technologies do not meet the various requirements of smart factory networks. Therefore, this paper proposes a smart factory design that uses wireless network in non-licensed spectrum band and data collection methods using IoT devices as a way to address these issues. Direct communication between PLC and IoT device is very compatible and data acquisition and analysis is possible at low cost. In addition, in this paper, we construct a network for smart factory using wireless network of unlicensed frequency band which has not been used as a method for establishing wireless network for smart factory. The wireless network of the proposed non-licensed frequency band enables highly reliable long distance communication required by the Smart Factory network without interfering with other wireless networks.

한국어

스마트 팩토리는 적은 설치비용과 운용비용으로 공장의 데이터를 수집할 수 있어야 하며, 수집한 데이터들을 주고받 기 위해 장거리 통신이 가능해야 한다. 이를 위한 기존의 스마트 팩토리의 데이터 수집 방법은 고가의 장비를 필요 로 할 뿐만 아니라 기기들 사이의 호환성이 낮기 때문에 설비의 도입과 교체가 어렵다. 그리고 장거리 통신을 구축 하기 위한 방법으로 주로 사용하는 유선 네트워크는 설치와 관리가 어렵고 많은 비용이 발생한다. 또, 무선 통신 기 술들은 스마트 팩토리의 네트워크가 필요로 하는 다양한 조건들을 만족하지 못하는 문제가 있다. 따라서 본 논문에 서는 이러한 문제를 해결하기 위한 방법으로 IoT 디바이스를 사용하는 데이터 수집 방법과 비 면허 주파수 대역의 무선 네트워크를 사용하는 스마트 팩토리 설계를 제안한다. PLC와 IoT 디바이스 사이의 직접 통신으로 호환성이 매우 높고, 저가의 비용으로 데이터의 수집과 분석이 가능하다. 또한, 본 논문에서는 기존에 스마트 팩토리용 무선 네트워크를 구축하기 위한 방법으로 사용되지 않았던 비 면허 주파수 대역의 무선 네트워크를 이용하여 스마트 팩토 리를 위한 네트워크를 구축한다. 제안하는 비 면허 주파수 대역의 무선 네트워크는 다른 무선 네트워크와의 간섭 없 이 스마트 팩토리의 네트워크가 요구하는 신뢰성 높은 장거리 통신이 가능하다.

목차

요약
Abstract
1. 서론
2. 관련연구
2.1 스마트 팩토리의 데이터 수집
2.2 스마트 팩토리의 통신 조건과 기존에 사용하는 무선 통신 기술
3. 스마트 팩토리를 위한 IoT 디바이스 기반의 데이터 수집과 무선 네트워크
3.2 스마트 팩토리 무선 네트워크의 요구조건과 비 면허 주파수대역 무선통신
4. 구현 및 실험 결과
4.2 ISM 대역의 무선 네트워크를 통한 PLC의 데이터 수집과 제어
5. 결론
참고문헌

저자정보

  • 유승재 Seungjae Yu. 인하대학교 컴퓨터공학과
  • 권구인 Gu-in Kwon. 인하대학교 컴퓨터공학과

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      0개의 논문이 장바구니에 담겼습니다.