원문정보
Analysis of SBR Effluent Treatment Characteristics by Coagulation Conditions
초록
영어
The purpose of this study is to analyze the treatment characteristics of PAC, polymer, and filter media by applying the aggregate altitude treatment process, which is a combination of dual hydrochclone and slope plate sedimentation tank, to the runoff of SBR process. The water quality of treated water with PAC and polymer were 1.1~1.4 NTU (mean 1.2 NTU), SS 9.7~13.5 mg/L (mean 10.8 mg/L) and TN 2.8~3.3 mg/L (mean 3.08 mg/L), and TP 0.12~0.2 mg/L (mean 0.15 mg/L). Using the PAC and filter media, the treated water quality were 0.3~0.5 NTU (mean 0.4 NTU), SS 3.9~6.1 mg/ L (mean 4.9 mg/L) and TN 2.6~3.5 mg/L (mean 2.94 mg/L) and TP 0.11~0.19 mg/L (mean 0.15 mg/L). In case of using the PAC, polymer and filter media, the treated water quality was 0.2~0.4 NTU (mean 0.3 NTU), SS 1.8~4.0 mg/L (mean 2.7 mg/L), TN 2.6~3.7 mg/L (mean 3.1 mg/L), and TP 0.11~0.22 mg/L (mean 0.16 mg/L). Experimental results showed that the treatment efficiency was the highest in case of using the PAC, polymer, and filter media, and the concentration range of 0.2 mg/L or less, which is the water quality standard of the total sewage treatment water of the public sewage treatment plant of the Ministry of Environment, can be satisfied.
한국어
본 연구에서는 SBR공정의 유출수를 대상으로 이중하이드로싸이클론과 경사판 침전조를 조합한 고도처리 공정을 적 용하여, PAC, 폴리머, 여재 적용에 따른 처리특성을 분석하고자 하였다. PAC와 폴리머를 사용한 실험에서의 처리수의 수 질은 탁도 1.1~1.4 NTU (평균 1.2 NTU), SS 9.7~13.5 mg/L (평균 10.8 mg/L), TN 2.8~3.3 mg/L (평균 3.08 mg/L), TP 0.12~0.2 mg/L (평균 0.15 mg/L)의 범위로 분석되었다. PAC와 여재를 사용한 실험에서의 처리 수질은 탁도 0.3~0.5 NTU (평균 0.4 NTU), SS 3.9~6.1 mg/L (평균 4.9 mg/L), TN 2.6~3.5 mg/L (평균 2.94 mg/L), TP 0.11~0.19 mg/L (평균 0.15 mg/L)의 범위로 나타났다. PAC 와 폴리머, 여재를 사용한 실험에서의 처리 수질은 탁도 0.2~0.4 NTU (평균 0.3 NTU), SS 1.8~4.0 mg/L (평균 2.7 mg/L), TN 2.6~3.7 mg/L (평균 3.1 mg/L), TP 0.11~0.22 mg/L (평균 0.16 mg/L)의 범위로 분 석되었다. 실험결과 PAC와 폴리머, 여재를 적용한 실험에서 처리효율이 가장 높았고 강화된 환경부의 공공하수처리장 총인 방류수 수질기준인 0.2 mg/L 이하의 농도 범위를 만족 할 수 있는 것으로 나타났다.
목차
요약문
I. 서론
II. 연구 방법
1. 고도처리공정의 구성
2. 고도처리공정의 운전 및 분석방법
III. 결과 및 고찰
1. PAC와 폴리머를 이용한 고도처리
2. PAC와 여재를 이용한 고도처리
3. PAC 및 폴리머와 여재를 이용한 고도처리
4. 운전조건별 처리특성 분석
IV. 결론
사사
References