원문정보
초록
영어
Our present study, we impregnated Al-Fe-Mg-Si (NFM) nanocomposites having various concentrations 0, 1000, 3000, and 5000 mg/L in biomass in order to make carbonized biomass. We characterized the properties of the impregnated samples through thermogravimetric/differential thermal analysis (TG–DTA), pore distribution, scanning electron microscopy (SEM). The best results were observed for a NFM nanocomposites concentration of 5000 mg/L. After the first heat treatment, carbonization, and activation processes, the fixed carbon ratio and iodine adsorptivity were increased by 21.89% and 368 mg/g, 23.98% and 475 mg/g, 26.40% and 238 mg/g, respectively. The remove rate of malodorous and VOCs were that the sample shows good removal capabilities. From above results, our sample could be used for the removal of noxious and malodorous gases and for the purification of wastewater.
목차
1. Introduction
2. Experimental process
2.1 Biomass
2.2 Al-Fe-Mg-Si (NFM) nanocomposites
2.3 Pore distribution analysis of impregnated nanocomposites sample
2.4 Analysis of physical properties
2.5 Sample preparation
3. Results and discussion
4. Conclusions
5. References