earticle

논문검색

<학술연구>

BOSCH 솔레노이드 방식의 Grade 인젝터와 IQA 인젝터 불량이 연료 분사량제어에 미치는 영향에 관한 실험적 연구

원문정보

An Experimental Study on the Influence of BOSCH Solenoid Grade Injector and IQA Injector Failure on Fuel Injection Control

강성구, 김철수

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

In this paper, 'Pico scope' was used to measure and analyze high voltage waveforms of 'Grade injector' and 'IQA injector' due to defective solenoid injector of CRDI diesel engine, and the following conclusions were obtained. In the case of the injector of 'Grade Injector' and 'IQA Injector', there was no change in the injection timing of the injector while the injector was installed. However, by controlling the operation time, It is judged that the injector control is insufficiently controlled when the number of revolutions of the engine is increased to 2000 rpm and 3000 rpm in the idling state in the idling state because the injector failure is precisely controlled in the idling state, When determining the fault injector, the waveform of the 'Grade injector' and 'IQA injector' can be detected by waveform analysis by comparing the injection control time by measuring the high voltage waveform of the injector control in idle idling state. Can be easily diagnosed and maintained. I hope this study will be handed to the mechanics to make diagnosis of CRDI injector convenient.

목차

ABSTRACT
 1. 서론
 2. 이론적 연구
 3. 실험장치의 구성과 방법
  3.1 실험장비
  3.2 실험 방법
 4. 실험결과 및 고찰
  4.1 H단자 전압파형
 5. 결론
 References

저자정보

  • 강성구 Sung-Gu Kang. Member, Graduate School of Industrial Technology, Automotive Engineering, Gangneung-Wonju National University
  • 김철수 Chul-Soo Kim. Member, School of mechanical and automotive engineering of Gangneung-Wonju National University

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.