earticle

논문검색

BROWN GAS INCINERATOR FOR WASTE DESTRUCTION AND ENVIRONMENTAL POLLUTION COMPLIANCE

원문정보

Kho Boon Kie, Ashwani K. Gupta

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

All municipal wastes consists large amounts of water (as much as 60% by mass) which hinders the performance of waste incinerators. Excess water can easily be separated out from the municipal solid wastes using centrifuges. The waste water can be reformed to Brown gas (di-atomic and mon-atomic hydrogen and oxygen) using an electrolyzers. At the instant that the water splits, the hydrogen and oxygen are in their mon-atomic state (H and O). Brown gas in the form of hydrogen and oxygen production form waste water is useful from waste waters and all kinds of solid wastes. Dehydrated waste can be easily combusted in an incinerator. Waste is an unavoidable by-product of most human activity. Economic development and rising living standards, including the Asian and Pacific Region have led to increased quantity and complexity of generated waste, whilst industrial diversification and the provision of expanded health-care facilities have added substantial quantities of industrial hazardous waste and biomedical waste into the waste stream with potentially severe environmental and human health consequences. Technologies available remove the large and diverse amounts of wastes generated include incineration, ocean dumping, lagooning, sanitary landfill, direct combustion, pyrolysis, gasification and more. However, available information reveals that incineration.is widely used with reasonable good success to manage the large amounts of wastes generated from low moisture content wastes. Today most incinerators are stoker incinerator which produces dioxins in low temperatures regions of the incinerator as well as other criteria pollutants emission. . High temperature (1600C) zones in the incinerator assist in melting the glass and metal in the waste to mitigate dioxin formation and release of heavy metals in to the environment. Low energy density and high moisture content in the waste require the use of auxiliary fuel to maintain high temperatures in the incinerator. Separating out the water from waste and reforming water to Brown gas and burning low moisture solid wastes in incinerator helps environmental benign means of wastes management. In this paper, different technologies are described that form key elements of overall waste management system, including the brown gas production from the water collected from solid wastes that can be used in the incinerator to further increase the incinerator temperature.

목차

ABSTRACT
 1. INTRODUCTION
  1.1. Rule of 3T’s (Temperature, Time and Turbulence) in Combustion
  1.2. Negative Impacts of Incinerators
 2. DESCRIPTION OF DIOXINS AND FURANS
 3. OXYHYDROGEN
  3.1. Properties
  3.2. Production
 4. WATER ENERGY
  4.1. Brown Gas
 5. CONCLUSIONS
 6. ACKNOWLEDGEMENTS
 7. REFERENCES

저자정보

  • Kho Boon Kie Sekolah Menengah Kebangsaan Lutong, Jalan Pantai Lutong, 98000 Miri, Sarawak, Malaysia
  • Ashwani K. Gupta University of Maryland, College Park, MD 20742 USA

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,600원

      0개의 논문이 장바구니에 담겼습니다.