earticle

논문검색

<생산기술>

스티어링 휠 다이나믹 댐퍼의 방진고무 강성 파라메터 연구

원문정보

Study on Damping Stiffness Parameter of Steering Wheel Dynamic Damper

남재현, 박기완, 강재영

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

The purpose of this study is to determine the stiffness of rubber of dynamic damper. This damper system reduces the steering wheel vibration caused by idling oscillation of the engine. Therefore, in order to measure the stiffness of the silicone rubber in the dynamic damper system, the material test of the silicone rubber was carried out. Using the measured stiffness, the FEM model of the dynamic damper system was constructed and the correlation by the experimental data was shown at an error of less than 2%. In addition, the dynamic damper system was simplified to a two-degree-of-freedom spring-mass model and the effect of the stiffness change of the rubber on the natural frequency of the column shaft was analyzed theoretically. As a result, the amplitude of the column shaft was reduced as the stiffness of the silicone rubber was lowered.

목차

ABSTRACT
 1. 서론
 2. VMQ 실리콘 고무 물성시험 및 해석
  2.1 다이나믹 댐퍼 시스템
  2.2 VMQ 실리콘 고무 물성 특성 시험
  2.3 충격망치시험 및 모달해석
 3. 다이나믹 댐퍼 파라메터 스터디
  3.1 다이나믹 댐퍼 시스템 이론 모델
  3.2 VMQ silicon rubber의 강성 파라메터 스터디
 4. 결론
 후기
 References

저자정보

  • 남재현 Jae-Hyeon Nam. Kongju national university
  • 박기완 Ki-Wan Park. Kongju national university
  • 강재영 Jae-Young Kang. Member, Kongju national University

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.